【文章內容簡介】 onsult pipe material certificate document and attach it in attachment16./檢查材質證明并附于附件 16 Installation requirement/ 安裝要求 Using hotmelttype welding joint connecting the healthquick, circular layout, smooth, no dead ends。 each water point of use of diaphragm valves, the water intake point and the outlet layout drawings based on design requirements./采用熱熔式氬弧焊與衛生快裝接頭連接，循環布置，光滑、無死角；每個用水點采用隔膜閥，各取水點及出水口的布置依據圖紙?jiān)O(shè)計要求。 Inspection by Visual and check the relative records./目測及檢查相關記錄 purified water tank installation (A total of 1, water storage capacity of 1m3)/純化水儲罐安裝確認 (一只，貯水量 為 1m3) Method: Inspection by Visual, Measured with vernier caliper and Consult material certificate document and attach it in attachment16, records fill in attachment 17. 確認方法：目測、游標卡尺測量、檢查材質 證明 (附于附件 16),確認記錄填寫于附件 17。 Standards/合格標準： （ 1） Tank inside and outside surface is polished, smooth surface./儲罐內外表面經過拋光，表面光潔。 （ 2） Inside surface and sealed head: Material SS304 stainless steel, thickness 4mm/內筒體及封頭：材質 SS304 不銹鋼，厚度 4mm。 （ 3） Connectors and related auxiliary equipment/連接口及相關配套設備： ① Purified water Inlet(top)/ 純化水入口 (頂部 )： DN15 ② Purified water Outlet(bottom)/純化水出口 (底部 )： DN20 ③ Limber hole(bottom of the lowest)/排污口（底部最低位置）： DN15 ④ Clean hole (at the top of the middle position): DN32 With 3600 rotary cleaning ball, material SS304./清洗口 (頂部正中位置 )： DN32，配 3600旋轉清洗球，材質 SS304 不銹鋼。 ⑤ Breath hole (top)/呼吸 口 (頂部 )： DN15 purified water storage tank SCBA installation/純化水儲罐空氣呼吸器安裝確認 . The record fill in attachment 18./確認記錄填寫于附件 18。 Item/項目 Standard/合格標準 Method/確認方法 Purified Water System Validation Protocol 純化水系統驗證方案 Document Revision 00 Date 日期 20200301 Company Name 公司名稱 Page 頁碼 Page 9 of 39 Body material/殼體材質 SS304 Consult material certificate document and attach it in attachment16./檢查材質證明并附于附件 16 Filter material/過濾材質 Polypropylene/聚丙烯 Consult material certificate document and attach it in attachment16./檢查材質證明并附于附件 16 Seal method/密封方法 Melt together/熱熔合 Consult certificate document and attach it in attachment16./檢查證明并附于附件 16 Hole Diameter/孔徑 m Consult certificate document and attach it in attachment16./檢查證明并附于附件 16 Critical parts material qualification./關鍵部位材質確認 . The records fill in attachment19./確認記錄填寫于附件 19。 Parts name/部件 Requirement/要求 Method/確認方法 Body material/殼體材質 Media and requirements/介質及要求 Original water pump/原水泵 Stainless steel/不銹鋼 / Consult material certificate document and attach it in attachment16./檢查材質證明并附于附件 16 Multimedia filter/多介質 過濾器 FRP Quartz sand, anthracite/石英砂、無煙煤 Consult material certificate document and attach it in attachment16./檢查材質證明并附于附件 16 Activated carbon filters/活性炭過濾器 FRP Activated carbon/活性炭 Consult material certificate document and attach it in attachment16./檢查材質證明并附于附件 16 Security filters/保安 濾器 Stainless steel/不銹鋼 Polyethylene fiber/聚乙烯纖維 Consult material certificate document and attach it in attachment16./檢查材質證明并附于附件 16 Highpressure pump/高壓泵 Stainless steel/不銹鋼 / Consult material certificate document and attach it in attachment16./檢查材質證明并附于附件 16 Cleaning Pumps/清洗泵 Stainless steel/不銹鋼 / Consult material certificate document and attach it in attachment16./檢查材質證明并附于附件 16 Purified Water System Validation Protocol 純化水系統驗證方案 Document Revision 00 Date 日期 20200301 Company Name 公司名稱 Page 頁碼 Page 10 of 39 reverse osmosis system element/一、二級反滲透元件 Stainless steel/不銹鋼 TFC Consult material certificate document and attach it in attachment16./檢查材質證明并附于附件 16 UV sterilizers/紫外線殺菌器 Stainless steel/不銹鋼 / Consult material certificate document and attach it in attachment16./檢查材質證明并附于附件 16 Microporous filter (the number is 2)/微孔過濾器(2 個 ) Stainless steel/不銹鋼 nylon filt er / m 尼龍液體過濾芯 Consult material certificate document and attach it in attachment16./檢查材質證明并附于附件 16 Terminal pump/ 終端水泵 Stainless steel/不銹鋼 / Consult material certificate document and attach it in attachment16./檢查材質證明并附于附件 16 Pipeline pressure test, clean, passivation and disinfect qualification./管道分配系統的試壓、清洗、鈍化、消毒確認 Qualification method/確認方法 Inspect the pipeline pressure test record(attachment 5), clean record before use(attachment 6),pipeline passivation records(attachment 7) and pipeline disinfect records(attachment 8)./檢查純化水管路試壓記錄 (附件 5)、純化水管道使用前清洗記錄 (附件 6)、純化水管道鈍化記錄 (附件 7)、純化水管道使用前消毒記錄 (附件 8) Standards/合格標準 （ 1） Pipeline pressure test/管路試壓： Pressure test with Water, experimental pressure is which is times working pressure ()。 the pipeline should be no leakage under the pressure./用水試壓，實驗壓力為工作壓力（ ）的 倍即 ，整個管路在實驗壓力下應無滲漏發生。 （ 2） Pipeline clean, passivation and disinfect/管道清洗、鈍化、消毒 ① Purified water cycle pipeline Prewashed: The purified water tank, pump and pipeline to connect into a cycle path, add sufficient amount of purified water to purified tank, open the pump to cycle for 15 minutes, open the drain valve, and then continue cycle./純化水循環預沖洗：將 純水罐 、水泵與管路連接成一個循環通路，在 純水罐 中注入足夠量的純化水，開啟水泵進行循環，循環 15 分鐘后，打開排水閥，邊循環邊排放。 ② Alkaline Cleaning: The sodium hydroxide (chemically pure and above) with hot water Purified Water System Validation Protocol 純化水系統驗證方案 Document Revision 00 Date 日期 20200301 Company Name 公司名稱 Page 頁碼 Page 11 of 39 (temperature 90 ℃ or above) preparation of 1% (w / v) solution (500L), with the circulation pump more than 30 minutes (after 30 minutes opening Each water point of the valve for 10 seconds to wash their), open the drain valve, discharge lye./ 堿液清洗：將氫氧化鈉（化學純以上）用熱水（溫度 90℃以上）配制成 1%（ w/v）的溶液(500L)，用水泵循環 30 分鐘以上（期間隔 30 分鐘 后 開啟每個用水點閥門 10 秒鐘對其進行清洗），打開排水閥，排放堿液。 ③ Rinse: Add purified water to purified water storage tank, star