s3c2440lcd控制器設置及代碼詳解-資料下載頁
2025-07-07 12:02本頁面
【正文】 4MB區域?qū)R，保證LCDBANK的值在移動視圖時不會改變。LCDBASEU[20:0] = ((U32)LCD_BUFFER 1)amp。0x1fffffFor dualscan LCD : These bits indicate A[21:1] of the start address of the upper address counter, which is for the upper frame memory of dual scan LCD or the frame memory of single scan LCD.For singlescan LCD : These bits indicate A[21:1] of the start address of the LCD frame buffer.雙掃描：表明高地址計數器的起始地址A[21:1]，用于LCD雙掃描的上部幀內存或者單掃描的幀內存單掃描：表明LCD幀緩沖的起始地址A[21:1]LCDSADDR2 0x4d000018幀緩沖起始寄存器2LCDBASEL[20:0] = ((LCD_ADDR + LCD_WIDTH * LCD_HEIGHT * 2) 1)amp。 0x1fffff = (LCD_ADDR 1 + LCD_WIDTH * LCD_HEIGHT)amp。 0x1fffffFor dualscan LCD: These bits indicate A[21:1] of the start address of the lower address counter, which is used for the lower frame memory of dual scan LCD.For single scan LCD: These bits indicate A[21:1] of the end address of the LCD frame buffer.LCDBASEL = ((the frame end address) 1) + 1= LCDBASEU + (PAGEWIDTH+OFFSIZE) x (LINEVAL+1)雙掃描：表明低地址計數器的起始地址A[21:1]，用于LCD雙掃描的下部幀內存或者單掃描的幀內存單掃描：表明LCD幀緩沖的結束地址A[21:1]LCDSADDR3 0x4d00001c幀緩沖起始寄存器3OFFSIZE = 0PAGEWIDTH = 320 虛擬屏頁寬（半字?jǐn)?shù)量） 定義了幀中的視圖域?qū)挾?程序分析至此，大概已經清楚是如何通過LCD_BUFFER[(y)][(x)] = c來實現在LCD上顯示單個像素了。就是在設置好各個LCD寄存器之后，通過將LCD_BUFFER地址與LCDBANK以及LCDBASEU、LCDBASEL對應之后，通過改變LCD_BUFFER里不同單元存儲的值(即像素的顏色)，即可在LCD相應位置上做出顯示。那么在應用不同LCD的時候，只需對LCDCONx以及LCDSADDRx做出相應的配置，在創建一個數組，做出上述的地址映射即可。關于VCLK計算，由于配置的是TFT，可用到公式VCLK = HCLK / [(CLKVAL+1) * 2] ( CLKVAL=0 )設置的FLK為400MHz，HCLK為100MHz，CLKVAL = 4，因此VLCK = 10MHz9 / 9
環評公示相關推薦
鄂ICP備17016276號-1