moldflow改善產品變形問題(編輯修改稿)
2025-01-28 16:06 本頁面
【文章內容簡介】 e mold Which were being filled at same time. .The fill time is about second in the model . No racetrack effect occur. Air trap appear on the last filled area. Do set enough vent over there. case2 case1 20230626 Reported: 1028 Fill Time The fill time result shows the position of the flow front at regular , as the cavity fills. Each color contour represent the parts of the mold Which were being filled at same time. .The fill time is about second in the model . No racetrack effect occur. Air trap appear on the last filled area. Do set enough vent over there. case2 case1 20230626 Reported: 1128 Pressure at V/P switchover The result shows the pressure distribution through the flow path inside the mold at the Switchover point from velocity to pressure control. case1 case2 20230626 Reported: 1228 Air Trap The air traps are show in pink node case1 case2 20230626 Reported: 1328 Air Trap The air traps are show in pink node case1 case2 20230626 Reported: 1428 Weld line Notice the positions of the weld lines
醫療健康相關推薦
鄂ICP備17016276號-1