某家用電器公司1002實驗室質量手冊-文庫吧資料
2025-06-13 14:12本頁面
【正文】 the test part, the lab shall make record properly, and label the test part with delivery date, entrustment department and the number of “Test Request” or the lot number of the test part . Meanwhile, niumber tha sample and place it in the AwaitingInspection area. The test part with storage restrictions must be stored in the prescribed way. All test parts must be prevented from damage or corrosion. 根據《試驗申請單》的測 試要求進行測試并作好原始記錄，測試完成后填寫《試驗報告》，報告中注明試件批號 /送驗單編號，送驗日期 /部門，以便報告可追溯原始記錄和試件，并將試件放置在已驗區域內。 Technical Department. The test procedures must conform to the customer requirements (including the sampling method), and the prevailing international / national standards shall be adopted as the test procedures. Approval must be obtained from the customer in case the methods other than the standards are adopted. 所有試驗規程、操作規程以及所需技術規范等均須在測試現場易于得到，供試驗人員使用。 The Engineering amp。 The calibration and test equipment shall be preserved, handled and stored in accordance with the “Inspection, Measuring and Test Equipment Control Procedure”. 測試控制 Test Control 由工程技術部編制各項試驗規程，其內容包括適用范圍、使用設備、試驗流程、試驗性能標準等，由工程技術部制定每臺測試設備的操作規程。 The measurement status of test equipment should be labeled in line with the Inspection, Measuring and Test Equipment Control Procedure. It is forbidden to use the inspection equipment without labels. In case the calibration data is lost or the standard is destroyed, immediately stop using this equipment. 按《檢驗、測量和試驗設備控制程序 》 規定建立每臺測試設備的檔案，包括校準記錄、檢定證 書、校準規程等。 Technical Department is responsible for formulating corresponding calibration specifications. The calibration specification should include the applicable scope, equipment in use, traceability standard, calibration site, calibration cycle, calibration method, and acceptance principles, as well as the actions in case of problems. The numbering and auditing of calibration specifications shall follow the “Document amp。執行，校準規程須符合顧客要求。 Technical Department is responsible to entrust an inspection anization accredited per ISO/IEC guideline 25, or recognized by the customer, or authorized by national technical supervising authority, to periodically calibrate the test equipment at site. T
公司管理相關推薦
鄂ICP備17016276號-1