moldflow改善產品變形問題-資料下載頁
2025-01-10 16:06本頁面
【正文】 lymer melt (flow )layer Cooing channel need to near sprue , for reduce cycle time. case2 case1 20230626 Reported: 2028 Temperature mold The temperature mold result shows the average temperature of the plastic mold interface at the top side, of the mold element during the cycle time . The result displays in the mold surface has a small range.. case2 case1 20230626 Reported: 2128 Volumetric Shrinkage at Ejection The Volumetric shrinkage at ejection result can be used to detect sink marks on the model. Volumetric shrinkage should be uniform across the whole part to reduce warpage. High shrinkage values could indicate sink marks or voids inside the part. Volumetric shrinkage can be controlled by the use of packing profiles. case1 case2 20230626 Reported: 2228 20230626 Reported: 2328 20230626 Reported: 2428 20230626 Reported: 2528 20230626 Reported: 2628 Cool and shrinkage is major cause to effect warpage. 20230626 Reported: 2728 20230626 Reported: 2828 20230626 Reported: 2928 演講完畢，謝謝觀看！
醫療健康相關推薦
鄂ICP備17016276號-1