【正文】
,腐蝕液濃度太低,腐蝕了一個多鐘還是一點輪廓,第三次自己買了氯化鐵重新打印再腐蝕。做了兩塊板同時不斷改進,才得到最終設計電路。最后就是調試,這一步花了幾天時間,覺得做設計最麻煩的還是調試,有時出不來結果,但不知問題出在哪。在本設計中已經提高了太陽能電池的轉換效率,但由于能力有限,所以沒有對太陽電池進行最大功率跟蹤設計,沒能更進一步提高太陽能的利用效率。注釋[1]百度百科 [2]百度文庫參考文獻[1] 劉宏, [M] .北京:化學工業出版社,2007[2] 沈輝,[M] .北京:化學工業出版社。2005[3] 羅曉曙,閉金杰,楊日星,張露. AVR單片機的太陽能電池控制器設計[J].現代電子技術,2009(10).[4] 百度百科 [5] 中國工控[6] 百度文庫[7] 黃海宏,黃長杰,王海欣著 太陽能控制器設計 [J]. 電子技術應用,May 2006The Design and Production of Solar ControllerTangyurongAbstract This paper has introduce a solar controller which is base on a MCU,which is used a lowpower and highperformance MCU which is called AT89S51 as the core devices of control circuit. This system is posed of a solar panels module, battery, charge and discharge circuit,Voltage and current acquisition circuit,MCU control circuit,Optocoupler drive circuit. It uses the PWM (Pulse Width Modulation) technology to control the solar panels recharge to battery, by controlling the opening and turnoff of MOSFET in the analog control circuit. The experimental results show that the the performance of the controller is be oversee the status of solar panels and battery .It can bring out the optimization of the abattery,and extends the life of battery.Key words Controller;MCU;Solar致 謝 我這次的設計能順利完成,得益于老師和同學的指導和幫助,在這里,我對他們的熱心表示誠摯的謝意。衷心感謝指導教師黃國現老師在這幾個月來的悉心指導與督促,從最初的定題,到資料收集,到寫作、修改,到論文定稿,他給了我耐心的指導和無私的幫助。讓我從原來對單片機一無所知到對單片機有所了解再到現在的會用C語言在keil軟件上編寫程序,讓我對硬件電路的設計從原來懼怕到現在從容查資料,設計電路,調試電路。同時也由衷的感謝同班薛量云同學提供了寶貴意見,使得設計符合要求。 最后,自己之所以能順利完成,還是要感謝還是自己的父母,如果沒有他們每日辛苦的勞動與從小對我學習有著嚴格要求和培養我嚴格做人做事的態度,正是他們的養育和教導,才有了今天的我現在的成績。廣西師范大學本科畢業論文(設計)學生誠信保證書本人鄭重承諾:畢業論文(設計)《 基于單片機AT89S51的太陽能控制器的設計與制作》的內容真實、可靠,系本人在 黃國現 指導教師的指導下獨立完成。如果存在弄虛作假、抄襲的情況,本人愿承擔全部責任。學生簽名:唐喻榮2010年 05月 0819