服裝廠面料檢驗之四分制-資料下載頁
2025-07-14 00:07本頁面
【正文】 ng amp。 skewing in the fabric.8.Major fabric defects are to be flagged by the Fabric Supplier. However, if any fault is not flagged already then it must be marked with a sticker or masking tape during inspection for its traceability and corrective action at cutting stage.9.Record the faults of the fabric on the Fabric Quality Report. ROLLTOROLL SHADE CHECKING SYSTEM:Textile Links and Controls suggests to use a format for the checking of all fabric shade variations from roll to roll. In this format water falls of different shades’ categories of different rolls is maintained and pared to each other to check the extent of the shading variation. If any shade requires special attention / treatment in the cutting, it is mentioned in the remarks column. If any fabric is out of tolerance with respect to the Master Sample or the shade variation extent among the rolls is out of tolerance, then the fabric is reject. The rejected fabric is sent back to Fabric Supplier for reprocessing / replacement.TOOLS FOR FABRIC CHECKING:The person who is responsible for fabric inspection must have the following facilities / equipments in good working condition.1.Inspection frame with counter. 2.D 65 light source (sunlight) / TL 84 light source at the inspection frame as per the requirement of the customer. 3.Measuring tape amp。 pair of scissors.4.Stickers or masking tape to identify the faults.5.Pick glass.6.Digital Camera for taking reference snaps.7.Master fabric sample or customer’s reference sample.8.Textile Links and Controls fabric inspection form.ELIGIBILITY CRITERA FOR THE QUALITY INSPECTOR:1.The person must be at least Graduate.2.He or she must have a minimum of two year experience in the textile industry.3.He or she must be well versed with the 4point fabric inspection system.4.He or she must be active and physically fit.5.He or she must not be colorblind. ***End***6 /
環評公示相關推薦
鄂ICP備17016276號-1