【文章內(nèi)容簡(jiǎn)介】
erances but shall be noted in the inspection report. And if any fabric exhibits bow or skew where its end use bees doubtful, then that fabric will be rejected. Fabric Odors:No roll shall be accepted that exhibits objectionable odors.Holes:All defects that break the fabric, regardless of size, shall be penalized a maximum of four points. A hole consists of two or more broken yarns.Common Fabric Faults:Although fabric faults are numerous but some of the mon fabric faults are mentioned below:Abrasion Mark: A place in the fabric where the surface has been damaged due to friction or abnormally weakened by any operation through which it has been passed.Bow: When the filling yarns lye in an arc across the width of the fabric.Skew: Distortion in the construction of the fabric . in the yarn that constitute the fabric.Crease: A fabric defect across the fabric width usually caused by a sharp fold.Oil Stain: Oil mark on the fabric.Dye Stain: An area of discoloration due to un even absorption of colorant.Hole: A break in the fabric involving more than two yarns.Mispick: A pick not properly interlaced.Double Pick: Two yarns running simultaneously, mostly in the weft.Misprint: In printed fabrics, either missed, or partially missed, or incorrectly positioned relative to each other.Slub: An abruptly thickened place in a yarn.Screen Out: The appearance of a colored separation line in a printed design.Calendar Line: Sharp pressmark on fabric due to the calendar during the processing.Contamination: Colored fibers with the warp or weft fibers. POINT CALCULATIONS:The following fabric penalty point grading standards are to be used when inspecting fabrics. Individual Roll Points:All decisions are based on a square meter putation. The following is used to determine the point count for each roll.(Total points * 3937) / (Inspected meters * Fabric width (inches))= Points per 100 square meter.Points:The total point count per contract fabric is calculated by