外文翻譯--三段式圓弧凸輪設計分析譯文-資料下載頁
2025-05-12 08:18本頁面
【導讀】本文對三段式圓弧凸輪輪廓進行了理論性描述。提出了凸輪輪廓的解析式并為以。之為尺寸參數討論。例舉了一些數值樣例來證明本理論描述的正確性并表明恰當?shù)娜６问綀A弧凸輪在工程上是可行的。凸輪是一種通過與從動件的直接表面接觸來傳輸預定運動的機構。一般地，從運動學[1,2]:來看，凸輪機構由三部分組成：凸輪（主動件）；從動件；凸輪機構廣泛用于現代機械中，特別是一些自動化機械裝備,內燃機與控制系。凸輪機構簡單而便宜，運動部件少而且結構緊湊。形曲線[2,5]以及它們的復合曲線[1,2,6,7]。本文主要致力于基于圓弧輪廓的凸輪，即所謂圓弧凸輪。加工可以通過利用初等幾何學準確地達到。這種凸輪的缺點是：凸輪輪廓上不同半徑圓弧交接處會產生加速度的劇變。最近，出于設計目的，有人開始用描述性視圖給予圓弧凸輪注意。，最大舉升位移1h。定于從動件軸上。與機架OXY坐標系相關的笛卡爾坐標，機架原點就是凸輪轉軸。半徑r的圓C4滿足
【正文】 本文提出了有關 三段式圓弧凸輪 輪廓基本設計的解析方法。從該法我們推導出了１個設計算法，從而可以高效地解決該方向 一些設計問題。另外還舉出了一些數字樣例以展示與討論三段式圓弧凸輪的多重設計以及工程可行性問題。 畢業設計 翻譯文 9 ７．參考文獻 [1] . Chen, Mechanics and Design of Cam Mechanisms, Pergamon Press, New York, 1982. [2] J. Angeles, . LopezCajun, Optimization of Cam Mechanisms, Kluwer Academic Publishers, Dordrecht, p. 1991. [3] R. Norton, Cam and cams follower (Chapter 7), in: . Erdman (Ed.), Modern Kinematics: Developments in the Last Forty Years, WileyInterscience, New York, 1993. [4] . Chen, A survey of the state of the art of cam system dynamics, Mechanism and Machine Theory 12(1977) 201– 224. [5] G. Scotto Lavina, in: Sistema (Ed.), Applicazioni di Meccanica Applicata alle Macchine, Roma, 1971. [6] . Rothbar, Cams Design, Dynamics and Accuracy, Wiley, New York, 1956. [7] . Shigley, . Uicker, Theory of Machine and Mechanisms, McGrawHill, New York, 1981. [8] . Magnani, G. Ruggieri, Meccanismi per Macchine Automatiche, UTET, Torino, 1986. [9] . Chironis, Mechanisms and Mechanical Devices Sourcebook, McGrawHill, New York, 1991. [10] . Krasnikov, Dynamics of cam mechanisms with cams countered by segments of circles, in: Proceedings of the International Conference on Mechanical Transmissions and Mechanisms, Tainjin, 1997, pp. 237– 238. [11] J. Oderfeld, A. Pogorzelski, On designing plane cam mechanisms, in: Proceedings of the Eighth World Congress on the Theory of Machines and Mechanisms, Prague, vol. 3, 1991, pp. 703– 705. [12] C. Lanni, M. Ceccarelli, . Carvhalo, An analytical design for two circulararc cams, in: Proceedings of the Fourth Iberoamerican Congress on Mechanical Engineering, Santiago de Chile, vol. 2, 1999. 924 C. Lanni et al. / Mechanism and Machine Theory 37 (2020) 915– 924
畢業設計相關推薦
鄂ICP備17016276號-1