外文翻譯--基于單片機的步進電機控制流水線設計-資料下載頁
2025-05-12 07:24本頁面
【導讀】要達到這個目的，步進電機是由一個單片微型計算機式。一旦LJ-JT02的光電開關型檢測產品合格，信號給出了以供。應鏈管理為指導的步進電機。此外，剪刀用于切斷包裝帶，這是由HRS4H-S-DC5V. 的繼電器類型實現。實驗結果表明，上述設計的有效性。料作為包裝材料的一系列新的包裝技術和設備有很大的影響。例如，有高速自動包裝。機的機電一體化，容易操作的多功能包裝機和高生產率的自動包裝機。裝機械行業成為被看好的機械制造行業。包裝機械廠出現在中國，然而生產率很低。在改革開放之初，許多食品機械和包裝機。械被介紹到中國，極大地促進了行業發展。因此，該行業在中國不僅要推進，還應進一步提高。在這項工作中，我們?cè)谀M包裝流水線的基礎上，由單片機驅動步進電機控制。為了便于實驗，用剪刀和發光二極管代替部分由步進電機控制的器件。線接收器和發射設備被關閉，并且輸出為高電平。目前該供應鏈管理已成功應用于智能儀表，或符合要求的狀態。
【正文】 language. It is flexible, convenient and pact in structure. What’s more it can be applied in a large of fields and has good portability. We choose Keil C language integrated development environment which shows Windows interface that generates object codes efficiently. The majority of assembly language codes generated are very pact and easy to understand. Then the program is burnt into SCM by ISP, a STC download programming software, which is easy to operate. The main program is shown as below. Void main () { ports()。 Time()_init()。 While(1) { if(P1^0==0) ……. } } The signals of photoelectric switch are detected by query mode. With interruption subroutine, the corresponding microcontroller produces conversion of high and low voltages. The interruption subroutine is shown as below. P1^1=0。 delay(m)。 P1^1=1。 delay(m)。 P1^3= 0。 13 13 P1^4= 0。 In main program this interruption subroutine is called for several times. That generates pulses to drive the stepper motor to work. In this experiment we set fullstep and reverse mode, which can be seen in the interruption subroutine. 4 TEST RESULTS After the hardware circuit is built pletely, the program is burnt into the SCM. In order to easy the experiment, the three output ports of SCM, , , , which should be connected to L297, is connected to three light emitting diodes, as shown in Figure 6. That the light emitting diodes are light means to output high voltage. And that they are off means to output low voltage from SCM. In order to facilitate observation, the output of the relay is also connected to a lightemitting diode instead of scissors. At the beginning, the four lightemitting diodes are all light. The results of the experiment show that when some object is passing the transmitter and the receiver of the photoelectric switch, that is to say, when the photoelectric switch detects some object, the lightemitting diode of begins to flash, which shows pulses are generated. At the same time the lightemitting diodes of and are off immediately, which means the stepper motor begins to work with the forward and halfstep mode. After a period of time, the lightemitting diode connected to the output of the delay are off first and light immediately, which means that the switch opens first and then closes. That act means the scissors cut off the packing tape first and then open, waiting for the next move. 5 CONCLUSION This experiment simulates the progress of the pipeling control, using stepper motor driven by SCM. It is noteworthy that in practice the output voltage is pulled down to be low and unstable because of the loads, so voltage follower and optocouplers are introduced here for antiinterference. This article bines SCM and the stepper motor to simulate packaging lines control. This 14 can be achieved by SCM with programming instead of mimic channel or digital circuits. This controltechnology which can improve the system performance does not dependent on hardware but onsoftware. It is called the microcontrol technology. With the development of microcontrol technology, the automatical and intellectual level will be improved continuously in packaging industry.
畢業設計相關推薦
鄂ICP備17016276號-1