包裝批記錄的簽發與流轉(編輯修改稿)
2025-08-30 01:25 本頁面
【文章內容簡介】 the “Penetration products”/”Present products” label (each pallet needs to stick one label)216。 單盒打印激光機選用固定模板,單盒批號效期打印區域右側打印大寫字母”E”,樣張參見附件2—該字樣表示為”滲透產品”.單盒批號效期打印區域右側打印大寫字母”S”,樣張參見附件2—該字樣表示為”贈送產品”. chose the dedicated template in the Carton Laser Jet machine, print the letter “E”(penetration product)/ letter ”S”(Present product) on the carton at the right side of printing area , refer to appendix 2 for the examples216。 每托盤生產完后操作工必須將”滲透產品”/”贈送產品”字樣標簽貼于整托外箱上after packaging one pallet, operator needs to stick the “penetration products” /”present product ”label on the pallet滲透產品Penetration 贈送產品Present 包裝批記錄的流轉Batch Record circulation 介紹Introduction將包裝批記錄由價值流協調出發，經QA檢查，倉庫配貨，最后流轉到包裝。 The BR begin with the value stream coordinator ,by QA inspection ,WH handler preparing materials ,at last it is moved to packaging. 詳細步驟 Detailed stepsID操作步驟（什么）Action (What)誰(職責)Who(func.)控制,指標,規則（QA, EHS, Fi…）Controls, KPIs, Rules (QA,EHS,Fi…)1包裝批記錄交給QAsubmit BR to QA價值流協調VSCN/A2批準包裝批記錄approve BRQA216。 參見QA020 refer to QA020 .216。 若QA檢查出BR有誤，退回價值流協調，修正后QA重新批準。If the PO has something wrong ,the QA return it to VSC, after the VSC correct it, QA approve it again3交給常溫庫操作員進行包材及稀釋液（若需要）的配料 Submit to ambient WH handler for packaging materials and diluents (if need) allocation.常溫庫操作員AmbientWH operator參見WH018 Refer to WH0184交給冷庫操作員進行半成品配貨Submit to cold WH handler for SFG allocation.冷庫操作員Cold WHoperator參見WH018 Refer to WH0185配完料后隨貨交給包裝線長 submit to line leader after finished material allocation線長Line leader參見PK039 ,QA020Refer to PK039,QA0206包裝批記錄加頁 replenish the batch record submit to line leader after finished material allocation價值流協調VSC216。 如果生產超過正常預計天數，包裝批記錄需要加頁。If production running time exceeds normal, some pages in BR mainly for paste sample print materials will not be enough.216。 在補頁右上角敲包裝流水號的章.Stamp pack number a
教學課件相關推薦
鄂ICP備17016276號-1