dek印刷機操作指引(編輯修改稿)
2025-06-09 18:49 本頁面
【文章內(nèi)容簡介】 cover.. Press blue system button.. Press Exit.. Press Home Camera.. Press Open Cover. Align a mylar to the PCB and tape to the rails with masking tape.. Refer to the Assembly Build Instruction to determine if a custom tooling plate is required. Align the custom tooling plate or universal tooling pins or blocks to the open areas on the mylar.. Remove the mylar, Close the cover and Press Exit Figure . Stencil Loading. Press the Setup Box on the screen or F6 on the keyboard. (See Figure , Location 1). Press the Change Screen box on the screen or F5 on the keyboard. (See Figure , Location 3). Open the printhead cover (Figure ) and remove the existing screen if needed. (Figure ).Figure . Load a new stencil into the printer. Ensure correct orientation and print justification. (Figure 13). Figure 13. Close the front printhead cover (Figure 14) and press the blue system button. (Figure ) Figure 14. Press the Change Screen box on the screen or F5 on the keyboard. (Figure , Location 3). Press the Exit box on the screen or F8 on the keyboard. (Figure , Location 4). Press the Exit box on the screen or F8 on the keyboard. (Figure , Location 3).. Load The Solder Paste. Press Paste Load.. Press Manual Load.. Open Cover and Load Paste.. Deposit a bead just in front of the stencil image.. Close the cover and Press the Blue system button.. Press Continue.. Press Exit.. Squeegee Loading. Press Setup.. Press Change Squeegee.. Open the Cover and change the squeegees.. Close the cover and Press the Blue system button.. Press Continue.. Press Exit.2. Paper loading. Press Open Co
語文相關(guān)推薦
鄂ICP備17016276號-1