焊接材料質量管理規定-wenkub
2023-06-07 18:17:19 本頁面
【正文】 uired by the Owner, the management rules for the project shall be made according to the Owner’s requirement and the implementation of such rules shall be supervised.4 采購 焊接材料的采購人員應具備足夠的焊接材料基本知識，了解焊接材料在焊接生產中的用途及重要性。 物資部根據材料準備單負責采購相關事宜，并且負責材料的入庫保管和出庫。1 ScopeThis Standard specifies management requirements of welding materials (., welding electrode, welding wire, welding flux, alloy powder, backing and welding gas) during purchase, acceptance, warehousing and use. In order to ensure service performance of welding materials, necessary storage, drying and cleaning installations shall be made available, and reliable management specifications shall be established and strictly observed.This Standard applies to quality management of the said welding materials during welding operation.2 引用標準下列標準所包含的條文，通過在本標準中引用而構成為本標準的條文。目錄Table of Contents1 范圍 61 Scope 62 引用標準 62. Normative references 63 職責 83. Responsibilities 84 采購 84. Purchase 85 驗收 9 驗收項目 9 包裝檢驗 9 質量證明書檢驗 95. Acceptance inspection 9 Inspection items 9 Packing inspection 9 Inspection of quality certificates 9 外觀檢驗 9 成分及性能試驗 10 檢驗結果的認可 10 驗收標記 10 Exterior inspection 10 Composition and performance test 10 Approval of inspection results 10 Inspection mark 106 入庫 106. Warehousing 117 庫存保管 11 存放條件 117. Storage 11 Storage conditions 11 庫存期間的檢查 12 Inspection during storage 128 出庫 128. Distribution 129 使用過程中的管理 13 一般要求 139. Management during use 14 General requirements 14 烘干、保溫及清理 14 Drying, heat insulation and cleaning 14 識別標志 15 焊接材料的回收 15 Identification mark 15 Recovery of welding materials 15 回收的焊接材料的烘干 16 焊劑的重復使用 16 Dry of recovery welding materials 16 Repeated use of welding flux 16焊接材料質量管理規程Corporate Management Rules for Welding Material Quality Control1 范圍本標準規定了焊接材料,包括焊條、焊絲、焊劑、合金粉末、襯墊及焊接用氣體等，在采購、驗收、庫存保管及使用過程中的管理要求。標準出版時，所示版本均為有效。 質管部負責來料驗收和現場的使用監督。 焊接材料的采購應依據訂貨技術條件，按擇優定點的原則，在合格供應商中選擇采購。 焊接材料的供貨方應提供焊接材料的質量證明書(說明書)或合格標記，船級社證書，并保證其所提供的焊接材料產品符合有關標準或供貨協議的要求。5. Acceptance inspection Inspection itemsInspection items of welding materials shall be determined in accordance with manufacturing specifications and types of welding products, classification society rules, Owner’s technical conditions and actual requirements. Packing inspectionCheck and make sure the package of welding materials meets the requirements of relevant standards, is sound, undamaged and not damped. Inspection of quality certificatesFor welding materials furnished with quality certificates or classification certificates, check and make sure the data as provided in such certificates are all plete and meet specified requirements. 外觀檢驗檢驗焊接材料的外表面是否污染，在儲運過程中是否產生有可能影響焊接質量的缺陷，識別標志是否清晰、牢固，與產品實物是否相符。焊接材料經驗收檢驗后應出具檢驗報告，并經有關職能部門認可。其內容包括：a) 焊接材料的名稱、型號(或牌號)，或內部移植代號；b) 生產廠；c) 規格；d) 批號或爐號；e) 數量(或重量)；f) 生產日期；g) 入庫日期；h) 有效期(自驗收合格之日起至規定的期限)。c) Specifications。g) Warehousing date。 焊接材料應按有關的技術要求和安全規程妥善保管。定期對庫存的焊接材料進行檢查，并將檢查結果作書面記錄。8. Distribution To ensure the use of welding materials within effective period and avoid bad consequence of expiration of storage life, the distribution of welding materials shall follow the “FIFO (first in, first out)” principle. The quantity of welding materials taken out of warehouse shall be controlled in strict accordance with product consumption data, and warehousing materials may be sent out of warehouse only against the corresponding material requisition and with the approval by storekeeper. 庫存超期的焊接材
環評公示相關推薦
鄂ICP備17016276號-1