【正文】 c requirements for assemblies excluded herein.2. 參考文件: PEFERENCE DOCUMENTS :,否則文件以指 標或申請?zhí)岚溉諡樯掌?APPLICAB LE DOCUMENTThe following documents form a part to this specification to the extentSpecified herein. Unless otherwise indicated, the documents is of theIssue if effect on the date of invitation to bid or request for proposal. : ORDER OF PRECED 本文若與其製程管制項目相牴觸,則以製程管制項目為優先. In the event of a conflict between this document and the manufacturing process Details, The manufacturing process details shall take precedence. 本文若與其製程管制項目相牴觸,則以製程管制項目為優先. In the event of a conflict between this document, reference documents and piece Part drawings, the piece part drawings will take precedence.: INSPECTION METHOD : 依下列規定檢測. VISUAL INSPECTION Inspection shall be conducted as follows. :目視檢測以工廠常態照明(100177。20呎燭光之冷白螢照明光) 為宜. LightingVisual inspection shall be conducted under normal shop lighting (100177。45角度)兩方向進行零件組件 目視檢測. The assembly or piece part shall be viewed in two positions, normal to Inspector and perpendicular to the surface(177。color uniformity) color discontinuities (streaks, stains, blotches, etc.)are acceptable. :,表面或邊緣 脫色不接受. Arching marks One mark per part less than inch in diameter is of surface or edge in not acceptable. :正常之沖壓痕跡可接受. Stamping stamping marks are acceptable. :電鍍或轉化塗裝程序正常產生之輕微條痕或水漬可接受 Surface phenomena Light streaking or water spotting occurring as a normal part orconversion costing process is acceptable.:零件應無灰塵、污垢、潤滑油、機油、鉻酸或任何其他表 面沾染物,如果是搬運材料時, 無任何可能陷在硬體、裂縫或彎摺處或其他凹陷處的沾染物. Cleanliness Assemblies shall be free of dirt, grime, oil and other contaminants Dust caused by shipping material is acceptable if it can be blown offwith air. Cosmetic surface shall be free of adhesive contaminants.: painted surfaces . : 起氣泡不接受。 slot covers), will be inspected as individual items only for slug marks, scratches / abrasions and water spots . : painted surface :刮痕或磨損以裸露出金屬者,不接受, 圓範圍內,只有不超過二個未裸露金屬之刮痕或磨損,且未改變表面顏 色,則可接受,任何肉眼可見破壞花紋之條紋或 撕痕,: CPU 上蓋之後邊緣之刮痕或磨損可接受. Scratches and abrasions Scratches and abrasions are not acceptable if they expose bare metal. If the scratch or abrasion does not expose bare metal, does not change the surface color or is less than in diameter, it is acceptable provided there are no more than two scratches or abrasion in a diameter circle. Any visible marks than ripple or tear the textured surface are not : scratches or abrasions are acceptable on the rear edge of CPU hood :髒污改變表面顏色, ,接受.Contamination Contamination that change the surface color and exceeds in diameter is not acceptable. Contamination less than in diametershall be considered not visible. The minimum distance between any (2) particles of contamination shall be . :, . Inclusions Inclusions greater than in diameter are not acceptable. There shall be no more than four (4) inclusions within any diameter circle and no closer than . : 徑之圓內不得有超過一個凹痕或條紋. Dents and slug marks . Dents and slug marks greater than in diameter are not acceptable There shall be no more than one (1) dent or slug mark in any Diameter circle. : CLASS III SURFACES. : Plated surfaces. : ,組裝工具造成的明顯螺旋狀刮痕,不得超過四個刮傷或三個磨損.Scratches Scratches greater than are not acceptable. Spiralscratches greater than in diameter caused by assembly tools arenot acceptable. Abrasions greater than in diameter are notacceptable. There shall be no more than fore (4) scratches or three (3)abrasions in any diameter circle. : ,不得超過三個凹痕及壓痕.Dents and Slug MarksDents and slug marks greater than in diameter are not acceptableThere shall be no more than three (3) dents or slug marks in any diameter circle. : 括白色氧化所造成脫色斑點, . Color uniformity (Post Plated Parts only) Surface color may vary from blue to gold to silver with iridescent streaking being acceptable. Six (6) discoloration’s , including those caused by white oxidation, are acceptable within any diameter circle, provided they are not greater than mm long by wide or in diameter. :水漬大于1/2總表面積者不予接受.Water SpotsWater spots are not acceptable if the total area they occupy is greater than 1/2 of the surface area.: Painted SurfacesA. 刮痕或磨損:刮痕或磨損以致裸露出金屬者,不接受.Scratches and AbrasionsScratches and abrasion are not acceptable if they expose bare metal. B. 髒污: .Contamination Contamination greater than in diameter is not acceptable.C. 雜質:.Inclusions Inclusions greater than in diameter are not acceptable. There shall be no more than six (6) inclusions within any diameter circle and no two (2) closer than .D. 凹痕及壓痕:. .Dents and Slug Marks Dents and slug marks greater than in diameter are not acceptable. There shall be no more than three (3) dents or slug marks in any diameter circle.: CLASSIVSURFACES : Plated Surfaces : . ,不得超過6 個刮傷或4個磨損. Scratches Scratches greater than long by wide are not acceptable. Abrasions greater than in diameter are not acceptable. There shall be no more than six (6) scratches or four (4) abrasions within any diameter circle. B. 凹痕及壓痕: ,不得超過三個凹痕及壓痕. Dents and Slug Marks Dents and slug marks greater than in diameter are not acceptable. There shall be no more than three (3) within any diameter circle. C. 水漬: 水漬大于3/4總表面積者不予接受. Water Spots Water spots are acceptable if the area they occupy is no more than 3/4 of the surface area.