【正文】 Printing content refer to the ARTWORK table.5. 包裝與運輸：按一定數量封裝，由供應商提供零件排版布局圖，避免相互之間粘結. Package and Transport:Supplier should provide tactic should be packaged independent.. Plating_platic技術要求：1. 材料：材料采用 ABS (奇美757電鍍級), 塑膠顏色為原色,注塑時須采用100%原材料。 Material: ABS（CHIMEI 757）, in original color and with 100% raw material .2. 尺寸：圖面尺寸用于檢驗零件電鍍后成品外形、功能和裝配； ,未注脫模斜度1度,未注尺寸按照Pro/e 3D Data。標有環形圈的是重點尺寸,每批次出貨均需檢查,Qualify時需要做CP/CPK。 Dimension: Specified dimensions in the drawing are used to check outside shape, function and assembly。 Unspecified round: 。Unspecified draft angle: 1 degree。Unspecified dimensions refer to Pro/e 3D model data。 Specified dimensions with marked ring are critical dimensions, need to be checked every shipment, and must do CP/CPK check in the Qualification stage.3. 公差：未注公差依照?qǐng)D面公差表。 Tolerance: Unspecified tolerance should ply with tolerance table in the drawing。4. 外觀：成品清潔、無雜質、無劃傷、縮水及其它瑕疵。穴號應刻在模具上。 飛邊及分型線段差≤,頂桿痕≤。澆口凸出≤。外觀面鍍鏡面鉻，鍍層厚度：20μm。零件表面為光面。Appearance：Product should be tidy and purity, no nick, no shrinkage and other number shall be located low on the surface.返回索引目錄 Galling shall be less than , ejector rod mark shall be less than , gate trim shall be less than . Appearance surface shall be plated mirror Cr, the thickness of plate layer shall be 。Surface shall be smooth.5. 包裝與運輸：為避免運送過程損傷，零件需獨立包裝，放入托盤對應的凹穴，托盤層堆放入紙箱。 Package and Transport:Product should be packaged independent, and lay in tray, finally put the trays in the paper box。6. 檢測須滿足德信質量標準: 《部品檢驗標準_注塑件》《電鍍件檢測標準》 Product should be satisfied with quality standard of Techfaith Wireless: . 《部品檢驗標準_注塑件》《電鍍件檢測標準》. Electroform: Ni ,T= mm 。:Ni, T=。: 圖面尺寸用于檢驗零件外形、功能和裝配。 ,未注脫模斜度1度,未注尺寸按照Pro/e 3D Data。 標有環形圈的是重點尺寸,每批次出貨均需檢查,Qualify時需要做CP/CPK。: specified dimension in the drawing shall be used to check outside shape,function and assembly。 unspecified round radius is 。 unspecified draft angle is 10。 unspecified dimensions refer to Pro/e 3D model data。 Specified dimensions with marked ring are critical dimensions, need to be checked every shipment, and must do CP/CPK check in the Qualification stage.：未注公差依照?qǐng)D面公差表。: Unspecified tolerance should ply with tolerance table in the drawing。: 沖切毛刺≤。 為毛刺方向見圖 成品清潔,無油漬,無劃痕,無凹陷,凸起,平面度≤。 外觀面按圖面鍍鏡面鉻和黑色細毛底面，電鍍層厚度：20μm。: stamping burr shall be less than , the symbol indicates burr direction。 product shall be tidy, no grease, no scratch, no sink depressions, no heave. the planeness shall be less than 。 appearance surface shall be plated black Cr on bottom layer and mirror Cr on the surface, the thickness of plate layer shall be 20μm。5. 包裝與運輸:零件外觀面需加貼保護膜. and transportation: appearance surface shall be protected by film。返回索引目錄6. 檢測須滿足勵德質量標準: should be satisfied with quality standard of Techfaith Wireless:1).《電鍍檢測標準》。 2).《金屬件檢測標準》13. 模切件. 雙面膠:圖面尺寸用于檢驗零件外形、功能和裝配。 標有環形圈的是重點尺寸,每批次出貨均需檢查,Qualify時需要做CP/CPK。Dimension: Specified dimensions in the drawing are used to check outside shape, function and assembly。Specified dimensions with marked ring are critical dimensions, need to be checked every shipment, and must do CP/CPK check in the Qualification stage.：Tesa4967，T=。雙面?zhèn)潆x型紙，對離型紙形狀有特別要求的在圖中已經畫出該離型紙且標識尺寸。另外一側離型紙廠商出具排版布局圖。Material: Tesa4967, T=。Have liner on both sides, one side liner must be specified in drawing, the other refer to supplier convenience making.3. 公差:未注公差依照?qǐng)D面公差表。Tolerance: Unspecified tolerance should ply with tolerance table in the drawing。4. 模切件邊緣整齊，不得有明顯的纖維和細屑?xì)埩?裝配時不得有拉絲現象。Boundary of part must be smooth amp。 no fibre,no Bur,no drawbench 5. 包裝和運輸：按一定數量封裝，避免相互之間粘結。Package and Transport: Product should be packaged with equivalent quantity, and avoid felt from each other。. 泡棉:圖面尺寸用于檢驗零件外形、功能和裝配。標有環形圈的是重點尺寸,每批次出貨均需檢查,Qualify時需要做CP/CPK。Dimension: Specified dimensions in the drawing are used to check outside shape, function and assembly。Specified dimensions with marked ring are critical dimensions, need to be checked every shipment, and must do CP/CPK check in the Qualification stage.返回索引目錄:Double Tape Material :tesa 4972, T=。（單面背膠) Gasket Material: Poron(4790921203904),Thickness: (含膠)。 Material:Double Tape Material :tesa 4972, T=。（Adhesive only one side） Gasket Material: Poron(4790921203904),Thickness: (including adhesive)。3. 公差:未注公差依照?qǐng)D面公差表；Tolerance: Unspecified tolerance should ply with tolerance table in the drawing。4. 模切件邊緣整齊，不得有明顯的纖維和細屑?xì)埩? 裝配時不得有拉絲現象。 boundary of part must be smooth amp。 no fibre,no Bur,no drawbench。5. 包裝與運輸：供應商出具排版布局圖，按照一定數量封裝，避免相互之間粘結。Package and Transport: suppliers provide layout of product。Product should be packaged with equivalent quantity, and avoid felt from each other。. 銅箔:圖面尺寸用于檢驗零件外形、功能和裝配。標有環形圈的是重點尺寸,每批次出貨均需檢查,Qualify時需要做CP/CPK。Dimension: Specified dimensions in the drawing are used to check outside shape, function and assembly。Specified dimensions with marked ring are critical dimensions, need to be checked every shipment, and must do CP/CPK check in the Qualification stage.2. 材料: 屏蔽材料：COPPER FOIL ,T=（僅單面背膠）。非導電膠：TESA4972, T=。導電阻抗：≤ Ω/sq inchMaterial:Double Tape Material :Tesa 4972, T=。（Adhesive only one side） Adhesive Material: TESA4972, T=。 Electrical resistance: ≤ Ω/sq inch 3. 公差:未注公差依照?qǐng)D面公差表；Tolerance: Unspecified tolerance should ply with tolerance table in the drawing。4. 模切件邊緣整齊，不得有明顯的纖維和細屑?xì)埩?裝配時不得有拉絲現象。Boundary of part must be smooth amp。 no fibre,no Bur,no drawbench。5. 包裝與運輸：離型紙廠商出具排版布局圖，按照一定數量封裝，避免褶皺和相互粘結。Package and Transport:suppliers provide the layout of product。Product should be packaged with equivalent quantity, and avoid felt from each other。返回索引目錄. 絕緣片技術要求：:圖面尺寸用于檢驗零件外形、功能和