【導讀】廟泰然大廈D座1003的名義參選。部參考資料和有關附件。我們完全理解并同意放棄對這方面有不明及。購項目的公開招標》的規定履行所有承諾的責任和義務。料，并理解貴方不一定接受最低價的參選方案，或其他任何參選方案。選型結果公布前所產生的費用參選方自負。參選文件自參選會議之日起有效期為30天。選被接受，則直至合同生效為止，本參選始終有效。投標人名稱:深圳市光網視科技有限公司招標編號:FJZY-2020-CW-1003包號:______________報價單位：人民幣元。7光模塊-S-1310nm-155M-STM1--LC-15kmXFP10-55-80DD266中國ONV. 烽火，諾西設備。

　　

【正文】 er the following standards Feature Agency Standard Certificate /Comments ISO9001 GB/T 190012020/ISO 9001:2020 06712Q10841R0S EMC CE EN 55022: 1998 + A1: 2020 + A2: 2020 QAAC0734/12 EN 61000 – 4 – 2: 1995 + A1: 1998 + A2: 2020 EN 61000 – 4 – 3: 2020 + A1: 2020 TUV RoHS Directive 2020/65/EC EMI FCC FCC Rules and Regulations Part 15 Subpart B Class B MTI130408003CF 產品二： 10 公里單芯光模塊 發射光模塊（型號SFP243110FT） Features ? Up to data rate ? Single LC receptacle optical interface pliant ? Single + power supply ? Hotpluggable ? AC coupling of PECL signals 中國移動通信集團福建有限公司福州分公司光模塊采購項目投標文件 第 45 頁 ? Serial ID module on MOD(02) ? International Class 1 laser safety certified ? Transmitter disable input ? Operating temperature range: 0℃ ~ +70℃ ? RoHS Compliance Applications ? Gigabit Ether ? Gigabit Fiber Channel ? Switch to switch interface ? Switched backplane applications Standards ? Compliant with SFP MSA (INF8074i) ? Compliant with SFF8472 ? Compliant with Gigabit Ether ? Compliant with ITUT Description The SFP transceiver is high performance, cost effective module supporting and 10km transmission distance with SMF(9/125μm). The transceiver consists of one section: a 1310nm FP laser transmitter. The transceiver satisfies class1 laser safety requirements. The transceiver is patible with SFP MultiSource Agreement (MSA) and SFF8472. For further information, please refer to SFP MSA. Module Block Diagram 中國移動通信集團福建有限公司福州分公司光模塊采購項目投標文件 第 46 頁 Absolute Maximum Ratings Parameter Symbol Min Max Unit Power Supply Voltage Vcc 4 V Storage Temperature Range Ts 40 85 176。C Relative Humidity RH 5 95 % Remended Operating Conditions Parameter Symbol Min Typical Max Unit Case Operating Temperature Range Tc 40 85 176。C Power Supply Voltage Vcc V Supply Current ITX+RX 300 mA Differential Input Voltage VIN 300 2200 mV Differential output Voltage VOUT mV Data Rate Optical and Electrical Characteristics Parameter Symbol Min Typical Max Unit Notes Transmitter Characteristics Center Wavelength Range λc 1260 1310 1360 nm FPLD Spectral Width Δλ 4 nm FPLD Launch Optical Power Pout 9 5 3 dBm 10km 1310nm FPLD Extinction Ratio EX 9 dB Contributed Total Jitter added at TP2 TJ UI 1 中國移動通信集團福建有限公司福州分公司光模塊采購項目投標文件 第 47 頁 Relative Intensity Noise RIN 120 dB/Hz 2 Eye Diagram Complies with eye masks when filtered Dispersion Penalty 1 dB Optical Rise/Fall Time Trise/Tfall 260 ps 3 Receiver Characteristics Receiver Sensitivity S dBm Receiver Overload Pin dBm Loss of SignalAsserted LOSA dB Loss of SignalDeasserted LOSD dB LOS Hysteresis dB Note: 1. TP refers to the pliance point specified in , section . 2. RIN is the laser noise, integrated over a specified bandwidth, measured relative to average optical power with 12dB return loss. For multimode application, the RIN is better than 117dB/Hz. 3. Optical transition time is the time interval required for the rising or falling edge of an optical pulse to transition between the 20% and 80% amplitudes relative to the logical 1 and 0 levels. Pin Definitions 中國移動通信集團福建有限公司福州分公司光模塊采購項目投標文件 第 48 頁 Pin Descriptions Pin Signal Name Description Plug Seq. Notes 1 VeeT Transmitter Ground 1 2 Tx_Fault Transmitter Fault Indication 3 1 3 Tx_Disable Transmitter Disable 3 2 4 MOD_DEF(2) SDA Serial Data Signal 3 3 5 MOD_DEF(1) SCL Serial Clock Signal 3 3 6 MOD_DEF(0) TTL Low 3 3 7 Rate Select Not Connected 3 8 LOS Loss of Signal 3 4 9 VeeR Receiver ground 1 10 VeeR Receiver ground 1 11 VeeR Receiver ground 1 12 RD Inv. Received Data Out 3 5 13 RD+ Received Data Out 3 5 14 VeeR Receiver ground 1 15 VccR Receiver Power Supply 2 16 VccT Transmitter Power Supply 2 17 VeeT Transmitter Ground 1 中國移動通信集團福建有限公司福州分公司光模塊采購項目投標文件 第 49 頁 18 TD+ Transmit Data In 3 6 19 TD Inv. Transmit Data In 3 6 20 VeeT Transmitter Ground 1 Note: 1. Tx Fault is open collector output which should be pulled up with a ~10kΩ resistor on the host board to a voltage between and Vcc+. Logic 0 indicates normal operation。 Logic 1 indicates a laser fault of some kind. In the low state, the output will be pulled to less than . 2. Tx Disable input is used to shut down the transmitter optical output. It is pulled up within the module with a ~10kΩ resistor. Its states are: Low (0 to ): Transmitter on Between (, ): Undefined High ( to ): Transmitter Disabled Open: Transmitter Disabled 3. ModDef 0,1,2. These are the module definition pins. They should be pulled up with a ~10kΩ resistor on the host board to supply less than VccT+ or VccR+. ModDef 0 is grounded by the module to indicate that the module is present. ModDef 1 is the clock line of two wire serial interface for serial ID. ModDef 2 is the data line of two wire serial interface for serial ID. 4. LOS is an open collector output which should be pulled up with a ~10kΩ resistor. Pull up voltage between and Vcc+. Logic 1 indicates loss of signal。 Logic 0 indicates normal operation. In the low state, the output will be pulled to less than . 5. RD/+: These are the differential receiver outputs. They are internally ACcoupled 100Ω differential lines which should be terminated with 100Ω (differential) at the user SERDES. 6. TD/+: These are the differential transmitter inputs. They are internally ACcoupled differential lines with 100Ω differential termination inside the module. The ACcoupling is done inside the module and is thus not required on host board. Remended Host Board