某家用電器公司1002實驗室質量手冊(編輯修改稿)
2024-07-18 14:12 本頁面
【文章內容簡介】 . Approval must be obtained from the customer in case the methods other than the standards are adopted. 所有試驗規程、操作規程以及所需技術規范等均須在測試現場易于得到，供試驗人員使用。 All the test procedures, operation regulations and necessary technical specifications must be easily available at the test site. 實驗室接到《試驗申請單》和試驗件后進行登記，在試驗件上標識送驗日期、委托部門和《試驗申請單》 編號或試件批號，并對來樣進行編號，放在待驗區內，對于有存放條件限制的試件須按規定的存放條件儲存，試件應注意防護不得損壞腐蝕。 At receipt of the “Test Request” and the test part, the lab shall make record properly, and label the test part with delivery date, entrustment department and the number of “Test Request” or the lot number of the test part . Meanwhile, niumber tha sample and place it in the AwaitingInspection area. The test part with storage restrictions must be stored in the prescribed way. All test parts must be prevented from damage or corrosion. 根據《試驗申請單》的測 試要求進行測試并作好原始記錄，測試完成后填寫《試驗報告》，報告中注明試件批號 /送驗單編號，送驗日期 /部門，以便報告可追溯原始記錄和試件，并將試件放置在已驗區域內。 Conduct the test according to the requirements as stated in the “Test Request” and make original records properly. After pleting the test, it is required to write “Test Report”, in which the test part lot No. / delivery No. and delivery date/department shall be indicated, so as to use the Test Report to trace the original records and test part. Meanwhile, place the test part in the area for tested part. 測試試件在測試完畢后可由實驗室通知送驗部 門取走，如送驗部門不來領取則試件由實驗室保存 15天以便復檢，保存期過后由實驗室負責處理，在保存期須對試件進行必要的防護。 After pleting the tests, the lab may inform the delivery department to take back the test part. In case the delivery department does not take the test part back, the lab may retain it for 15 days for reinspection. After the retention period, the lab may dispose the test part, but during retention period, the test part must be properly preserved. 試件經測試不合格則由實驗室出具試驗報告交送驗部門，由送驗部門按《不合格品控制程序》處置。 The lab will issue a test report to the delivery department if the test part fails the test. The delivery department will dispose per the “Nonconforming Product Control Procedures”. 試驗報告按《質量記錄控制程序》規定保存期保存。 The test report will be retained for a length of time as required in “Quality Record Control Procedure”. 在日后發現測試數據有誤，則立即通知工程技術部，工程技術部應及時通知車間隔離，如已發運，則由市場銷售部負責與顧客
公司管理相關推薦
鄂ICP備17016276號-1