【文章內容簡介】
cuits.The main one: mainly related to mold 60 and the mold 24 counters, dynamic display control circuit, the whole point timekeeping main divider circuits, which are packaged in modules, so that other circuits calls. To constitute a timing counter parts, through the separation of the 1HZ divider pulse timing, called dynamic display circuit display, through the whole point timekeeping circuit control buzzer.Subject II: mainly related counter mold 60 and the mold 24, a display control circuit, four data parator. Mold 60 and the mold 24 to form counter timing and memory circuit, called dynamic display control circuit shows that by four data parator pares the clock and the alarm hour, minute, and followup with the door control buzzer.關鍵詞: MAX+Plus2軟件 EPF10K10LC844 數字時鐘 基本功能電路 鬧鐘電路實驗一題目:Max+Plus2使用練習,完成一個簡單門電路的圖形設計輸入、編譯、仿真、管腳分配、下載。內容:實驗二題目:圖形設計輸入38譯碼器內容:38譯碼器。實驗三題目:同步十進制加法計數器內容:用74161實現十進制加法計數器。實驗四題目:同步六十進制計數器內容:用74160,74161等其他門電路完成。數字時鐘一.設計說明1.功能說明:利用MAX+Plus2軟件設計一個數字鐘,對設計電路進行功能仿真,并下載到EPF10K10LC844實驗系統中,可以完成00:00:00到23:59:59的計時功能,并在控制電路的作用下具有保持、清零、快速校時、快速校分、整點報時等功能。本電路在原有基礎上進行了拓展,具備以下功能:①.能進行正常的時、分、秒計時功能;②.整點報時功能當時鐘計到59’59”時開始報時,報時時間1秒;③.置零功能,可以將時鐘小時、分鐘、秒都置為零; ④. 快速校時,校分功能校定時其他計時電路保持;⑤. 鬧表功能—定時精確到分,鬧鐘設計響一分鐘,可關閉;2.功能簡介本電路具有三種不同的工作狀態(同步工作),可通過模式鍵進行換。a、正常計時狀態(RESET、A都為1):此狀態下數碼管顯示當前的時間,K1為校時開關,K2為校分開關,校分、校時都是以1HZ的信號進行快速到位的。b、鬧表狀態(RESET為1,A為0):此狀態下數碼管顯示當前鬧定的時間,K3為設定分時的開