中國電信cn2網絡介紹(編輯修改稿)
2025-05-30 18:42 本頁面
【文章內容簡介】 verse facilities Only POS interface are used on backbone interconnection to facilitate faster failures detection All work links are active (NOT working and protect) Each PoP’s router pair is connected by multiple routers. Link failure protection is the function of ISIS (layer 3 control) and would not be carried out on transport layer (layer 2 control) (不依賴 SDH或者 DWDm的傳輸層保護 ) ISIS routing protocol Per flow load sharing between dual pairs Failover load sharing Subsecond fast convergence for gold service Three priority LSP flooding and FIB update MPLS FRR 1:1 mode FRR is deployed in core layer for 50 links Sub50ms reroute time Built to maintain utilization not to exceed 50% during normal running As a congestionfree work, CN2 ensures premium priority for delivery of all packets in the core Higher Level of security Strict uRPF is deployed on all customer access interfaces Loose uRPF is deployed on interconnected interface 網間互連端口 Infrastructure ACLs (iACL) deny external traffic to ALL routers interfaces address. iACL are deployed on edges and borders of the work. 在 Cn2網絡外部接口互連和用戶接口上部署 ACL,不允許任何目的 Ip地址是CN2網絡 ,也就是網絡外部任何人不能到達 Cn2設備 . Infrastructure routes are distribted to inter or customer 隱形網絡設計 ,也就是在其他網絡上看不見 CN2網絡的路由信息 All router access control is manage by AAA servers and syslog (所有的操作都通過 AAA和 syslog) QOS technology would be deployed accordingly to reduce the impact of an attack or worm traffic. 通過 QOS機制保證高等級業務不收病毒泛濫等影響 ,通過 QOS控制病毒流量的泛濫 Different class service capability CN2網絡中 QOS技術的定位 QOS技術是統一承載網絡內部資源分配的手段，從資源占用的角度看，是將統一的 IP承載網絡邏輯上分為不同的資源子網。比如3G，軟交換、 MPLS VPN、 ATM等都可以單獨建網，現在采用IP/MPLS技術建設一個網絡，容量是所有網絡的疊加，通過 QOS技術分配資源給不同的業務。如 CN2中軟交換和 3G語音流量最大可占用 50%帶寬資源， V應用最大允許占用帶寬資源小于 15％。 QOS技術是網絡故障或者擁塞情況下，實現業務等級區分的手段，保證高等級業務提供。但在正常情況下，目前的 QOS技術不能實現業務等級的質量區分。 QOS技術是提高網絡資源利用效率的手段。充分利用 IP網絡統計復用的優勢，在保證各等級業務分配資源的前提下，充分利用部分剩余資源。比如軟交換業務最大優先占用 50％的資源，如果實際的軟交換業務流量只有 20％，剩下的 30％可以被 V等其他業務占用。 Different class service capability CN2 QOS positioning QOS is a technique use to allocate limited work resources to different services. Unlike traditional works of ATM, Frame Relay, and lease circuit services, CN2 provides an overlay work for all these services. To differentiate the services base on the class of importance or contract, QOS is the mechanism in place to segregate and allocate work resources to different class of services. Example of a QOS policy: 3G and softswitch traffic can be allocated with at least 50% of the available bandwidth while V can only consume
環評公示相關推薦
鄂ICP備17016276號-1