汽車底盤構造汽車自動變速器2009－(2)(編輯修改稿)
2025-05-26 13:14 本頁面
【文章內容簡介】 ont carrier to the output shaft. Note that a plete plaary gearset is shown with all three members. Output Shaft Front Carrier Splines 19 19 Connections, Reaction When a gear ratio change is desired, one of the members must be held stationary in reaction. This carrier can be held by a roller clutch or multidisc clutch. A band is also used to hold the reaction member. Rear Carrier with Lo amp。 Rev. Clutch Hub Rear Clutch Housing Roller Clutch Animation: OneWay Roller Clutch 20 20 Carrier with Pinions This carrier has four pinion gears. The carrier is constructed so that it can be held in reaction by a multidisc clutch. It is also connected to another gearset member. Hub for Lo and Reverse Clutch Pla Pinion Gear 21 21 Pla Pinions The pinion gears are mounted in the carrier so they can rotate freely on their shaft. Parts of a carrier are shown. Pinion Gear Needle Bearings Pinion Pin/Shaft Thrust Washer Thrust Washer 22 22 Simpson Gear Set This gear set bines portions of two simple gear sets
范文總結相關推薦
鄂ICP備17016276號-1