【正文】 The control of lab environment l must accord with the requirements as stipulated in the test and operation specification. 對于有溫度、濕度要求時，須由實驗室人員做好記錄，并在試驗報告上注明測試時的環境 條件。 Conduct the test according to the requirements as stated in the “Test Request” and make original records properly. After pleting the test, it is required to write “Test Report”, in which the test part lot No. / delivery No. and delivery date/department shall be indicated, so as to use the Test Report to trace the original records and test part. Meanwhile, place the test part in the area for tested part. 測試試件在測試完畢后可由實驗室通知送驗部 門取走，如送驗部門不來領取則試件由實驗室保存 15天以便復檢，保存期過后由實驗室負責處理，在保存期須對試件進行必要的防護。 For the test equipment beyond the pany calibration ability, the Engineering amp。 Engineering Department is responsible for the routine management of the laboratory, and the maintenance, repair, calibration and test control of the lab equipment. 人力資源部負責組織實驗室人員的培訓。 The calibration and test equipment shall be preserved, handled and stored in accordance with the “Inspection, Measuring and Test Equipment Control Procedure”. 測試控制 Test Control 由工程技術部編制各項試驗規程，其內容包括適用范圍、使用設備、試驗流程、試驗性能標準等，由工程技術部制定每臺測試設備的操作規程。 The training of the test/calibration staff will be carried out per the “Training Control Procedure”. The implementation of new test program or operation procedure of new equipment will be put forward by the Engineering amp。 The internal audit of the lab is per the Internal Quality Audit Control Procedures. 由管理者代表組織對實驗室進行內部質量審核，審核按年度內審計劃實施。 For the projects beyond the lab ability, the Engineering amp。 The measurement status of test equipment should be labeled in line with the Inspection, Measuring and Test Equipment Control Procedure. It is forbidden to use the inspection equipment without labels. In case the calibration data is lost or the standard is destroyed, immediately stop using this equipment. 按《檢驗、測量和試驗設備控制程序 》 規定建立每臺測試設備的檔案，包括校準記錄、檢定證 書、校準規程等。 This is applicable to the control over AICQ laboratory. 3 職責 Responsibility 技術工程部負責實驗室的日常管理，實驗室設備的維護、修理、校正和測試控制。文件和資料控制程序 187。 The lab will issue a test report to the delivery department if the test part fails the