某家用電器公司0203生產件批準控制程序-免費閱讀
【正文】 Performance Test Results R S S * R 9. 初始過程研究 Initial Process Study R R S * R 10. 測量系統分析 研究 Measuring System Analysis amp。當由于標準樣品外形尺寸而使貯存比較困難時，則應由顧客零件批準的部門以書面形式修改或放棄樣品保存要求。 Change of product appearance under the conditions that there are no appearance specifications. 在相同的過程中變更了參數（屬已批準產品的 PFMEA 參數以外部分，沒有包裝）。 The Quality Department is responsible for submitting the Production Part Approval Data to the customer. 4 工作程序 Work Procedures 定義 Definition 生產件批準提交（ PPAP） —— 從一個有效的生產過程中 (該過程必須是 1 小時到 8 小時的生產，且規定的生產數量至少為 300 件連續生產的部件，除非顧客授權的質量代表另有規定 )提取的零件和相關文件交顧客審批，且這個生產過程是由生產現場使用的工裝、工藝過程來進行的。 Ensure that the production parts supplied by AICQ can meet all customer engineering design record and specification requirements and that AICQ process have the potential to produce products that meet the customers’ requirements during an actual production run at the quoted production rate. 確保分供方提供生產件符合本公司工程設計記錄和規范的所有要求，并在實際生產過程中按 規定的生產節拍來生產，滿足本公司要求。 Other related departments shall cooperate with the Cross Function Team. 技術工程部負責生產件批準的記錄和標準樣品的保存。顧客可能因此會決定要求提交 PPAP 批準。 Reevaluate the operation task of the operators and do not cause changes to the process flow. f. 只對散裝材料 Only applicable to bulk materials: 對批準產品 DFMEA（配方范圍、包裝設計的更改）； Change of approved product DFMEA (prescription scope, package design). 對 PFMEA（過程參數）的更改； Change of PFMEA (process parameters). 不會 嚴重影響到特殊特性的更改； Changes that will not seriously affect the special characteristics. 對批準了的商品成分的更改和 /或批準的分承包方的更改； Change of approved modity position and/or approved subcontractors. 生產不涉及特殊特性的原材料的分承包方生產現場發生變化； Change of production site of raw material subcontractor not involving special characteristics. 不涉及特殊特性的原材料的新貨源； New source of raw materials not involving special characteristics. 加嚴的顧客 /銷售接受容差限值。 Responsible to provide part samples. Ⅲ、 材料標準 The standard of material 提供關重零部件供應商按《 PPAP手冊》等級 3提交，不適用條款除外。 *= The supplier must maintain at appropriate place and submit to the customer, if required. 。 The supplier, which provides us with raw material and ponents, should present PPAP under the notice from engineering department. The supplier can provide his products botchily after engineering department authorizes PPAP. These documents should include following items. Engineering department can ask supplier to provide other documents needed in product’s special cases ：參見 ； The time to provide : see requirement The requirement for supplier’ raw material 原材料供應商需提交以下資料： The supplier of raw material should provide the following documents. Ⅰ、 材料 /性能試驗結果 Material/performance testing result 負責提供公司要
公司管理相關推薦
鄂ICP備17016276號-1