【正文】 在兩種情況下，交叉梁應起拱100mm，除非圖紙上另有說明。 直徑為12mm的熱軋帶肋鋼條，型號為HRB335 或者 HRB400? cold drawn and ribbed wire grade HPB235。直徑為6mm amp。 Concrete characteristic strength (f’c) for the purposes of design shall be as follows:設計的混凝土的特征強度如下：?Blinding Concrete細石混凝土15MPa?Plain Mass Concrete素混凝土20MPa?Reinforced Concrete鋼筋混凝土32MPa190。For ultimate design, a Factor of Safety of 3, and a Capacity Reduction Factor of shall be adopted, and the value above also need to be confirmed after the geotechnical investigation 。基礎設計應該根據Golder Associates Pty Ltd提供的巖土報告開展。最主要的目的是確保土建和結構部件安裝安全，經濟，有效的進行。2. CODES, STANDARDS amp。Designers shall be responsible in ensuring that they make themselves familiar with all geotechnical information prior to mencing the design of foundations, retaining walls and buried structures like vaults and train unloaders. They shall ensure that they obtain the latest reports before mencing design work. Any additional information when required should be obtained by the Lead Civil/ Structural ，擋土墻，地下室和橋式卸車機等掩埋裝置的設計工作開始之前熟悉所有的巖土信息。當然，以上數據要在巖土勘測報告完成后才能確定。 Note: The concrete characteristic strength specified above shall be in accordance with AS 3600 and not GB 500102002. 注意：以上混凝土特征強度是根據AS3600的規定來指定的而不是GB 500102002。 10mm的熱軋光圓鋼條，型號為R250N? bars 12mm diameter and greater hot rolled ribbed grade D500N。 and冷拔帶肋鋼絲，型號為HPB235? welded wire fabric grade HRB400. 焊接鋼絲網，型號為HRB400190。梯板要是螺栓型，設計寬度為250mm（參考制造商的實際寬度表），裝配有3mm的地板凸邊，并且要熱侵鍍鋅。s catalogue for actual widths), be fitted with 3mm floor plate nosing and be hotdippedgalvanised ()所有的梯板要做成鋸齒形邊緣，使用32mm5mm的載重梁，當跨度達到1050mm要起拱40mm。 10mm的熱軋光圓鋼條，型號為HPB235? bars 12mm diameter and greater hot rolled ribbed grade HRB335 or HRB400。 10mm diameter hot rolled plain round bars grade R250N。190。指定的容許支承力不能超過動力機械，如初步粉碎機和磨碎機的動態組件的使用負荷。 steel against exterior atmospheric corrosion減少鋼鐵對外部大氣腐蝕的規范AS 2528 Bolts, studbolts and nuts for flanges and other high and low temperature applications螺栓，柱螺栓和螺帽法蘭及其他高低溫應用AS 2625 Rotating and reciprocating machinery mechanical vibration Parts 1 to 4旋轉和擺動機械機械振動第1至第4部分AS 2758 Aggregate and rock for engineering purposes符合工程師要求的骨料和石塊AS 2870 Residential slabs and footings建筑板和基礎AS 3582 Supplementary cementitious material for use with portland cement波特蘭水泥中混合膠凝材料的使用AS 3583 Method of test for supplementary cementitious materials for use with Portland cement波特蘭水泥中混合的膠凝材料的測試方法AS 3600 Concrete structures混凝土結構AS 3610 Formwork for concrete混凝土模板AS/NZS 3678 Structural steel Hotrolled plates, floorplates and slabs結構鋼熱軋板， 波紋板和平板AS/NZS 3679 Structural steel –ordinary weldable grades結構鋼普通焊等級AS 3700 SAA masonry code SAA磚石建筑規范AS 3703 Longspan corrugated steel structures大跨度波紋鋼結構AS 3735 Concrete structures retaining liquids混凝土結構保濕AS 3750 Paints for steel structures鋼結構涂層AS 3774 Loads on bulk solids containers散裝固體容器的載荷AS 3799 Liquid membrane – forming curving pounds for concrete液態膜 混凝土形成彎化合物AS 3905 Quality system guidelines質量體系準則AS 3972 Portland and blended cements波特蘭水泥和摻混合料的波特蘭水泥AS4100 Steel structures鋼結構AS4324 Mobile equipment for continuous handling of bulk materials移動設備對散裝材料的連續處理AS 4600 Cold formed steel structures冷彎型鋼結構AS/NZS 4671 Steel reinforcing materials鋼骨架原料AS 4678 Earth retaining structures擋土墻結構AS/NZS 4680 Hotdipped galvanised coatings on fabricated ferrous articles焊接鋼鐵制品的熱鍍鋅涂層DI024766 Civil Structure Design Page 6 of 45SINO IRON PROJECTDesign Criteria DC005Civil/Structure Design CriteriaDoc No:DI024729Revision:00Status:AFDRev Date:, 2008 Chinese Standards中國標準GB 500172003 Code for design of steel structures鋼結構設計規范GB/T 159194 High strength low alloy structural steels低合金高強度結構鋼GB 500102002 Code for design of concrete structures混凝土結構設計規范GB1499 Hot rolled ribbed steel bars for the reinforcement of concrete鋼筋混凝土用帶肋鋼筋GB13013 Hot rolled plain steel bars for the reinforcement of concrete鋼筋混凝土用熱軋光圓鋼筋GB13014 Remained heat treatment ribbed steel bars forthe reinforcement of concrete鋼筋混凝土用余熱處理鋼筋JGJ19 Prestressed Concrete with Cold Drawn Wire Design and Construction冷拔鋼絲預應力混凝土構件設計與施工規程JGJ/T114 Technical Specification for Concrete Structures Reinforced with Welded SteelFabric鋼筋焊接網混凝土結構技術規程GB 500182002 Technical code of coldformed thinwall steel structures冷彎薄壁型鋼結構技術規范 Other Standards其他標準CP 2012 British Standards Institute Code of practice for Foundations for Machinery英國標準協會－ 機械設備基礎原理應用準則VDI 2056 Verein Deutscher Ingenieure – Criteria for assessing mechanical vibrations of machines德國工程師協會――設備機械振動評估標準BHP Publication ‘Hot Rolled and Structural Steel Products’ bhp出版： 帶肋剛和結構剛生產Australian Reinforced Concrete Design Handbook to AS 3600 澳大利亞的as3600鋼筋混凝土設計手冊Australian Institute of Steel Construction: Design Capacity Tables For Structural Steel澳大利亞的鋼結構協會：鋼結構設計能力表3. GEOTECHNICAL INVESTIGATION巖土工程勘測A geotechnical investigation shall be undertaken to establish allowable bearing pressures before mencement of final design. The foundation design shall be based on the Geotechnical Report(to be prepared) by Golder Associates Pty Ltd ，要進行巖土勘測確定容許承載壓力。 Car Parks 硬路面區域和停車場.............................................................. 43 Concrete Paving鋪設混凝土路面..................................................................................................43 Access Roads 便道.................................................................................................................... .43 Intersections交叉...............................................................................................................43 Unsealed Road Design未封閉道路設計........................................................................... 44 Site Drainage 工地排水............................................................................................................... 44 Hydrology . 水文....