【正文】
該機左右發動機罩、左箱體蓋均采用油氣彈簧支撐,打開時省時、省力。停車制動器可以通過制動操縱手柄及緊急制動按鈕控制,操縱其中的任何一個,均可實現車輛制動。它采用國際采購方式采購配套件,對影響推土機性能的 發動機 、主液壓泵、驅動馬 達及關鍵的電氣元件均采用了國際名牌產品,確保該機性能優越,同時在設計中還溶入了多項創新技術。 1 Crawler Hydraulic Bulldozer TQ160 TQ160A in the reference and absorption of foreign advanced technology, based on a selfdeveloped hydrostatic drive tracktype bulldozer. It uses the procurement of international purchasing parts, bulldozer on the performance of the engine, the main hydraulic pump, drive motor and key electrical ponents of the international brandname products are used to ensure that the aircraft of superior performance, while also integrated into a number of design Innovative technology 1, Main technical parameters Deutz Engine BF6M1013E (imported) Rated Power (kW) / speed (r / min) 137 / 2 300 Total mass (kg) 16 500 Track center distance (mm) 1 880 Ground contact length (mm) 2 430 Track Width (mm) 510 Ground pressure (kPa) 67 Blade (L H) (mm) 3 420 1 150 Soil depth of maximum shear blade (mm) 545 Blade maximum lift height (mm) 1 095 Minimum turning radius (without blade) (mm) 1 900 Speed (km / h) forward two block: 0 ~ ,0 ~ 10 Back two block: 0 ~ ,0 ~ 10 2, the main structure and performance characteristics set axis units frame Shown in Figure 1, sets the frame with swing shaft structure, which with the balance beam is connected via a dedicated articulated mechanism to fully meet the bulldozer work in Taiwan, the swing frame required。 1、主要技術參數 發動機道依茨BF6M1013E(原裝進口) 額定功率(kW) /轉速(r /min)137 /2 300 整機質量(kg)16 500 履帶中心距(mm)1 880 履帶接地長度(mm)2 430 履帶板寬度(mm)510 接地比壓(kPa)67 鏟刀(長 高)(mm)3 420 1 150 鏟刀最大切土深度(mm)545 鏟刀最大提升高 度(mm)1 095 最小轉彎半徑(不帶鏟)(mm)1 900 車速(km /h) 前進兩擋: 0~4.