【正文】 F And 140176。) (12 176。 b) Four times the load specified in Table , not to exceed 100 pounds for all other supporting surfaces。 angle of incline, in the least stable positioning and configuration, without tip over. 11 Effects Of Extreme Temperature 24 Hours At 32176。 from back at 16 inch above the seat. 25. Arm Strength Test (Vertical 垂直的 ) No permanent deformation at 300 Lbs. (90 Lbs. children) for 1 min. The vertical（吹垂直的） load is uniformly（均一的） applied through a 5 inch wide board across both arms – No failure / deformation 26． Arm Strength Test (Horizontal 水平的 ) No permanent deformation at 75 Lbs. (45 Lbs. children) for 1 min. The load is applied to the armrest horizontally at the most forward point of the armrest area. 27. Leg Strength 腿力量 No failure or permanent deformation at 75 Lbs. (40 Lbs. Child / folding chairs) applied to each leg at 1 inch from the end of the leg. Force is applied in four directions (Forward, rearward, side and side) for 1 minute. 36. Moisture Content (%) (Solid Wood Only)濕度 8% 12% (Do not test on MDF) 37. Lightfastness （耐光性） Class 20 hrs Test up to 5 major/main ponents MTL/ SGS TEST LIST (2) (CD Storage/Rack/Cabi/ chest/ chest) Quality test standard/method Criteria Results / Design/Features The actuality must keep consistency with the claim. Shall be included if necessary. Shall include assembly, mounting, use, maintenance, cleaning and safety information as required in the language(s) applicable to the destination country(s) with no errors or spelling mistakes. Shall be easy to follow and accurate. size/weight Report actual. Shall ply with any claims (0%, +3%) 4. Costco Plastic Bag Warning Statement If plastic bags (of any thickness) with a perimeter of 14 inches or greater are used in inner packaging, the following warning statement must be printed on at least one side of each bag in English, French and Spanish: 5. Lead In Surface Coating Shall not exceed（超越） 600 ppm (% by weight) total lead 6. Workmanship/ Level ? No major defects ? No ponents missing, malformed（難看的） or fractured（破裂） ? No hardware missing ? Smoothly ground welds（接合） , not overground and free of pits and splatter ? No burrs ? No loose ponents and unsecured fastening where rigidity （硬度） is required ? In the case of wood (. laminates 薄片 ) proper and uniform adhesion ? No scratches, dents, cracks, marred or discolored surface ? In the case of molded plastic, consistent and concise form and no defects evidencing 跡象 of overuse of mold. ? Finished edges and seams ? Accurate and consistent painting ? Components even in color, uniform clarity 7. Sharp Points and Edges Shall have no sharp edges or sharp points on any ponent other than those required for functional use. 8. Cross Cut Adhesion（粘著力） Plating （電鍍） / finish must stay affixed（粘貼） – using a utility knife, cut a grid（格子） of 16 squares. Use 3M masking tape (202), apply to the grid. Remove to see if plating / finish remains intact.（完整無(wú)缺的） 9. Glass Top Thickness (Raw Edge (mm) If less than mm, tempered glass required. If mm or greater, tempered glass not required. 10. Glass top Thickness (Encased) (mm) If less than mm, tempered glass required. If mm or greater, tempered glass not required 11. Stability – Static (If Applicable – Test Filled and Unfilled.) Shall withstand an 8176。 F And 140176。F No failure 12. Resistance（抵抗力） To Corrosion（侵蝕） (Metal Components) Shall withstand（抵擋） 24 hours in 1% salt spray (fog) with no corrosion or visual change. 13. Effects Of Humidity（濕度） No change after 24 hours. 95% RH amp。 angle of incline, in the least stable positioning and configuration, without tip over. 11 Effects Of Extreme Temperature 24 Hours At 32176。 F And 140176。 or c) The maximum intended load for a dedicated storage area intended to acmodate a specific accessory. Each supporting surface shall be tested for one minute with the other supporting surfaces unloaded. 24. Loading Test – Simultaneous Loading (Conventional TV Stand ) The cart or stand shall be constructed so that there is no collapse or permanent damage that results in a risk of injury to persons when each supporting surface is simultaneously loaded with the load specified in table for a period of one minute. Modification = test to 300 pounds. 25. Loading Test Simultaneous Loading (Flat Panel TV Stand ) The cart or stand shall be constructed so that there is no collapse or permanent damage that results in a risk of injury to persons when each supporting surface is simultaneously loaded with the load specified in Table for a period of one minute. Modification = Test flat panel TV rack to 200 Lbs or manufacturer’s specified load, whichever is greater. 26 Wall or Ceiling Mounting Security Test A shelf or similar product intended for direct wall mounting shall be so constructed so that there is no cracking or breaking or damage to the mounting bracket, its securing means and the portion of the shelf attached to it when each supporting surface is both individually and simultaneously loaded with four times the load specified in table for one minute 27. Appurtenance Loading Test (TipOver Resistance) For units over 30 Inch height, apply a 50 Lb downward force for 1 minute to any portion of the unit within 30 inches of the floor that is likely to support part or all of a child’s weight. There shall be no tipover of the unit 28. Impact Test – Glass Parts Structural glass parts shall ply with the requirements in the impact test, section 19. A decorative glass part having an area greater than 1 Ft2 or having a minor dimension greater than 18 inches, shall not be broken, shattered (totally or in part), or displaced when tested as described