【正文】 22. Finger Entrapment Shall meet the requirements intended to eliminate the possible hazard that may be caused by changing clearances or permanent entrapment and pinching of fixed openings.(5mm or 13mm) 23. Loading Test Individual Loading (Flat Panel TV Stand ) A cart or stand shall be constructed so that there is no collapse or permanent damage that results in risk of injury to persons when each supporting surface it individually loaded with: a) 200 pounds for flat panel TV rack。 a The fixture shall be stable in the forward direction at the angle specified and bee unstable (tip over) when the angle is increased by 1 degree. b Includes weight of text fixture. MTL/ SGS TEST LIST (4) Bed (For Trundle and Regular Beds, Adult use) Quality test standard/method Criteria Results / Design/Features The actuality must keep consistency with the claim. Shall be included if necessary. Shall include assembly, mounting, use, maintenance, cleaning and safety information as required in the language(s) applicable to the destination country(s) with no errors or spelling mistakes. Shall be easy to follow and accurate. size/weight Report actual. Shall ply with any claims (0%, +3%) 4. Costco Plastic Bag Warning Statement If plastic bags (of any thickness) with a perimeter of 14 inches or greater are used in inner packaging, the following warning statement must be printed on at least one side of each bag in English, French and Spanish: 5. Lead In Surface Coating Shall not exceed 600 ppm (% by weight) total lead 6. Workmanship/ Level ? No major defects ? No ponents missing, malformed or fractured ? No hardware missing ? Smoothly ground welds, not overground and free of pits and splatter ? No burrs ? No loose ponents and unsecured fastening where rigidity is required ? In the case of wood (. laminates) proper and uniform adhesion ? No scratches, dents, cracks, marred or discolored surface ? In the case of molded plastic, consistent and concise form and no defects evidencing of overuse of mold. ? Finished edges and seams ? Accurate and consistent painting ? Components even in color, uniform clarity ? All seams and ponents in even alignment 7. Sharp Points and Edges Shall have no sharp edges or sharp points on any ponent other than those required for functional use. 8. Cross Cut Adhesion Plating / finish must stay affixed – using a utility knife, cut a grid of 16 squares. Use 3M masking tape (202), apply to the grid. Remove to see if plating / finish remains intact. 9. Level Applicable by design – must sit level with no wobbling on a flat level surface. The top must also be level/parallel pared to the bottom. 10. Cycle Test / Test For Moving Components 100 times / cycles use of moving ponents – no failure and all ponents must have and maintain a smooth uniform movement throughout each cycle. (All functional parts must be evenly aligned at the start of the test and remain evenly aligned.) 11. Folding Mechanisms and Hinges Shall meet the requirements to eliminate the possible crushing, laceration or pinching hazards that might occur in folding mechanisms and hinges. 11 Effects Of Extreme Temperature 24 Hours At 32176。) (12 176。 F And 140176。F No failure 12. Resistance（抵抗力） To Corrosion（侵蝕） (Metal Components) Shall withstand（抵擋） 24 hours in 1% salt spray (fog) with no corrosion or visual change. 13. Effects Of Humidity（濕度） No change after 24 hours. 95% RH amp。 from back at 16 inch above the seat. 25. Arm Strength Test (Vertical 垂直的 ) No permanent deformation at 300 Lbs. (90 Lbs. children) for 1 min. The vertical（吹垂直的） load is uniformly（均一的） applied through a 5 inch wide board across both arms – No failure / deformation 26． Arm Strength Test (Horizontal 水平的 ) No permanent deformation at 75 Lbs. (45 Lbs. children) for 1 min. The load is applied to the armrest horizontally at the most forward point of the armrest area. 27. Leg Strength 腿力量 No failure or permanent deformation at 75 Lbs. (40 Lbs. Child / folding chairs) applied to each leg at 1 inch from the end of the leg. Force is applied in four directions (Forward, rearward, side and side) for 1 minute. 36. Moisture Content (%) (Solid Wood Only)濕度 8% 12% (Do not test on MDF) 37. Lightfastness （耐光性） Class 20 hrs Test up to 5 major/main ponents MTL/ SGS TEST LIST (2) (CD Storage/Rack/Cabi/ chest/ chest) Quality test standard/method Criteria Results / Design/Features The actuality must keep consistency with the claim. Shall be included if necessary. Shall include assembly, mounting, use, maintenance, cleaning and safety information as required in the language(s) applicable to the destination country(s) with no errors or spelling mistakes. Shall be easy to follow and accurate. size/weight Report actual. Shall ply with any claims (0%, +3%) 4. Costco Plastic Bag Warning Statement If plastic bags (of any thickness) with a perimeter of 14 inches or greater are used in inner packaging, the following warning statement must be printed on at least one side of each bag in English, French and Spanish: 5. Lead In Surface Coating Shall not exceed（超越） 600 ppm (% by weight) total lead 6. Workmanship/ Level ? No major defects ? No ponents missing, malformed（難看的） or fractured（破裂） ? No hardware missing ? Smoothly ground welds（接合） , not overground and free of pits and splatter ? No burrs ? No loose ponents and unsecured fastening where rigidity （硬度） is required ? In the case of wood (. laminates 薄片 ) proper and uniform adhesion ? No scratches, dents, cracks, marred or discolored surface ? In the case of molded plastic, consistent and concise form and no defects evidencing 跡象 of overuse of mold. ? Finished edges and seams ? Accurate and