【正文】 formation at 75 Lbs. (45 Lbs. children) for 1 min. The load is applied to the armrest horizontally at the most forward point of the armrest area. 27. Leg Strength 腿力量 No failure or permanent deformation at 75 Lbs. (40 Lbs. Child / folding chairs) applied to each leg at 1 inch from the end of the leg. Force is applied in four directions (Forward, rearward, side and side) for 1 minute. 36. Moisture Content (%) (Solid Wood Only)濕度 8% 12% (Do not test on MDF) 37. Lightfastness （耐光性） Class @ 20 hrs Test up to 5 major/main ponents MTL/ SGS TEST LIST (2) (CD Storage/Rack/Cabi/ chest/ chest) Quality test standard/method Criteria Results / Design/Features The actuality must keep consistency with the claim. Shall be included if necessary. Shall include assembly, mounting, use, maintenance, cleaning and safety information as required in the language(s) applicable to the destination country(s) with no errors or spelling mistakes. Shall be easy to follow and accurate. size/weight Report actual. Shall ply with any claims (0%, +3%) 4. Costco Plastic Bag Warning Statement If plastic bags (of any thickness) with a perimeter of 14 inches or greater are used in inner packaging, the following warning statement must be printed on at least one side of each bag in English, French and Spanish: 5. Lead In Surface Coating Shall not exceed（超越） 600 ppm (% by weight) total lead 6. Workmanship/ Level ? No major defects ? No ponents missing, malformed（難看的） or fractured（破裂） ? No hardware missing ? Smoothly ground welds（接合） , not overground and free of pits and splatter ? No burrs ? No loose ponents and unsecured fastening where rigidity （硬度） is required ? In the case of wood (. laminates 薄片 ) proper and uniform adhesion ? No scratches, dents, cracks, marred or discolored surface ? In the case of molded plastic, consistent and concise form and no defects evidencing 跡象 of overuse of mold. ? Finished edges and seams ? Accurate and consistent painting ? Components even in color, uniform clarity 7. Sharp Points and Edges Shall have no sharp edges or sharp points on any ponent other than those required for functional use. 8. Cross Cut Adhesion（粘著力） Plating （電鍍） / finish must stay affixed（粘貼） – using a utility knife, cut a grid（格子） of 16 squares. Use 3M masking tape (202), apply to the grid. Remove to see if plating / finish remains intact.（完整無缺的） 9. Glass Top Thickness (Raw Edge (mm) If less than mm, tempered glass required. If mm or greater, tempered glass not required. 10. Glass top Thickness (Encased) (mm) If less than mm, tempered glass required. If mm or greater, tempered glass not required 11. Stability – Static (If Applicable – Test Filled and Unfilled.) Shall withstand an 8176。 angle of incline, in the least stable positioning and configuration, without tip over. 11 Effects Of Extreme Temperature 24 Hours At 32176。 F And 140176。F No failure 12. Resistance To Corrosion (Metal Components) Shall withstand 24 hours in 1% salt spray (fog) with no corrosion or visual change. 13. Effects Of Humidity No change after 24 hours. @ 95% RH amp。 100176。F 14. Stain Resistance (Do not test on piic table/ benches/ racks) Various food materials – should resist permanent staining.( After 2 hours, remove) 1. French’s Mustard t/2. Heinz Ketchup/3. Ragu Spaghetti sauce (original)/ “ 5. Folgers Instant Coffee/ 5. Welch’s Grape Juice/6. Kraft BBQ Sauce (original) / Red Wine 15 Resistance to Scratching / Marring Other Surfaces No scratching or marring of surface (3 cycles of 6” back and forth.) Conduct with and without levelers. Note if levelers bee bent or e off. Note any damage / defects (bent/broken levelers) 16. Handle Strength Shall withstand x claimed load or 50 lbs for 1 hour 17. Drop Test (For Units 30 Inches Height Or Over, Or Greater Than 20 Inches Width) Raise the end of the long axis of the storage unit to the specified height and release the end. Repeat test for the other end. There shall be no damage as a result of the test. Drop Height 10 inches (Unit Weight 1049 Lbs) / 6 Inches (Unit Weight 5099 Lbs 4 Inches (Unit Weight 100200 Lbs) 2 Inches (Unit Weight 200 Lbs): 18. Drop Test (For Units Under 30 Inches Height And Less Than 20 Inches Width Or With Total Weight Under 10 Lbs) No breakage or separation after 3 drops from 12 inches on vinyl tile over concrete. CD/Audio tape/or Video tape Holder – No failure or deformation after 1 drop on end from 10 inches 19. Moisture Content (%)(Solid Wood Only) 8% 12% (Do not test on MDF) 20. Cycle Test / Test for Moving Components 100 times / cycles use of moving ponents – no failure and all ponents must have and maintain a smooth uniform movement throughout each cycle 21. Finger Entrapment Shall meet the requirements intended to eliminate the possible hazard that may be caused by changing clearances or permanent entrapment and pinching of fixed openings.(5mm or 13mm) 22. Resistance To Hot Water Pour 25 ml of boiling water and allow cooling. Dry surface, Shall be no graying or spotting 23. Cap Removal Strength on end of tubes (or cap covers on screw ends) Shall not separate minimum holding force @ lbs. 24. Caster Performance (If Supplied) Max 20 lbs. pull to move under 200 lbs. load. 25. Caster/Roller Durability Shall result in no adverse effects on rolling after use tests. Rolling 100 meters on smooth concrete floor under uniformly distributed load: 200 lbs for Serving Cart/Rack/ 500 lbs for larger Cabis/Shelves 26 Drawer Loading Capacity Max. 1/4 in. deformation @ 10 lbs distributed load / drawer 27. Distributed Load Test(Except Magazine, Shoe, Coat or Wine Racks)