機械設計外文翻譯外文文獻英文文獻及譯文齒輪和軸的介紹-文庫吧資料
2024-08-19 10:47本頁面
【正文】 能夠同其他有關人員進行交流和磋商。設計人員的基本職責是努力使機器來適應人們。很有可能在最后選定的方案中，采用了某些未被接受的方案中的一些想法。只有這樣，才不至于堵塞創新的思路。在設計的初始階段，應該允許設計人員充分發揮創造性，不受各種約束。因此，一個性能優越的產品誕生的同時，也伴隨著較高的風險。例如，即使將一個小數點的位置放錯，也會使正確的設計變成錯誤的。僅僅使用數據和公式是不足以在一個好的設計中做出所需的全部決定的。 應當把機械設計看成是機械設計人員運用創造性的才能進行產品設計、系統分析和制定產品的制造工藝學的一個良機。發明、發現和科技知識本身并不一定能給人類帶來好處，只有當它們被應用在產品上才能產生效益。設計工程師不僅在工作上要有創造性，還必須在機械制圖、運動學、工程材料、材料力學和機械制造工藝學等方面具有深厚的基礎知識。 進行各種機械設計工作的人員通常被稱為設計人員或者機械設計工程師。 the two angles are equal for a 90deg. Shaft angle.When gears are to be used to transmit motion between intersecting shaft, some of bevel gear is required. Although bevel gear are usually made for a shaft angle of 90 deg. They may be produced for almost any shaft angle. The teeth may be cast, milled, or generated. Only the generated teeth may be classed as accurate. In a typical bevel gear mounting, one of the gear is often mounted outboard of the bearing. This means that shaft deflection can be more pronounced and have a greater effect on the contact of teeth. Another difficulty, which occurs in predicting the stress in bevelgear teeth, is the fact the teeth are tapered. Straight bevel gears are easy to design and simple to manufacture and give very good results in service if they are mounted accurately and positively. As in the case of squr gears, however, they bee noisy at higher values of the pitchline velocity. In these cases it is often good design practice to go to the spiral bevel gear, which is the bevel counterpart of the helical gear. As in the case of helical gears, spiral bevel gears give a much smoother tooth action than straight bevel gears, and hence are useful where high speed are encountered.It is frequently desirable, as in the case of automotive differential applications, to have gearing similar to bevel gears but with the shaft offset. Such gears are called hypoid gears because their pitch surfaces are hyperboloids of revolution. The tooth action between such gears is a bination of rolling and sliding along a straight line and has much in mon with that of worm gears.譯文二：譯文機械設計理論機械設計是一門通過設計新產品或者改進老產品來滿足人類需求的應用技術科學。 in helical gears, the line is diagonal across the face of the tooth. It is this gradual of the teeth and the smooth transfer of load from one tooth to another, which give helical gears the ability to transmit heavy loads at high speeds. Helical gears subject the shaft bearings to both radial and thrust loads. When the thrust loads bee high or are objectionable for other reasons, it may be desirable to use double helical gears. A double helical gear (herringbone) is equivalent to two helical gears of opposite hand, mounted side by side on the same shaft. They develop opposite thrust reactions and thus cancel out the thrust load. When two or more single helical gears are mounted on the same shaft, the hand of the gears should be selected so as to produce the minimum thrust load.Crossedhelical, or spiral, gears are those in whi
物理相關推薦
鄂ICP備17016276號-1