【正文】 first 64 KB memory size next.Display BIOS copyright notice4FAsk Password Security (Optional)The memory size display has started. The display is updated during the memory test. Performing the sequential and random memory test nextInitialize Multi Boot50Write All CMOS Values Back to RAM and ClearThe memory below 1 MB has been tested and initialized. Adjusting the displayed memory size for relocation and shadowing next.Display CPU type and speed CODEAwardAMI51Enable Parity Checker. Enable NMI, Enable Cache Before BootThe memory size display was adjusted for relocation and shadowing. Testing the memory above 1 MB next.Initialize EISA board 52Initialize Option ROMs from C8000h to EFFFFh or if FSCAN Enabled to F7FFFhThe memory above 1 MB has been tested and initialized. Saving the memory size information next.Test keyboard53Initialize Time Value in 40h: BIOS AreaThe memory size information and the CPU registers are saved. Entering real mode next.54Shutdown was successful. The CPU is in real mode. Disabling the Gate A20 line, parity, and the NMI nextSet key click if enabled55Enable USB devices57The A20 address line, parity, and the NMI are disabled. Adjusting the memory size depending on relocation and shadowing next.58The memory size was adjusted for relocation and shadowing. Clearing the Hit DEL message nextTest for unexpected interrupts59The Hit DEL message is cleared. The WAIT... message is displayed. Starting the DMA and interrupt controller test next.Initialize POST display service5ADisplay prompt 39。Press F2 to enter SETUP39。 CODEAwardAMI5BDisable CPU cache5CTest RAM between 512 and 640 KB