廈門某機電公司產品介紹-資料下載頁
2025-06-25 05:01本頁面
【正文】 e all necessary technical skills and be equipped with protective eye shields, pay attention to the tie and wristband, without gloves, a working cap should be worn if you have long hair.
3. Check the tip without fragmentation, drop, abnormal attrition, or board bend etc..
4. When install, make sure that the slewing direction of the blade is in accordance with the main spindle.
5. When install, check the rotate speed and load of the machine that is fit for the materials.
6. Always keep spacers and flanges clean. Also check tolerances on diameters, sides and concentricity by using a clock gauge. The flanges used to secure the blade must be of the same diameter, at least 1/3 the diameter of the blades. The spacers must be perfectly parallet (see ).
7. When install, the height of the blade should be higher than that of the panel, at least, equal to the height of the tooth.(see 4)
8. When crosscutting, make sure the tips are more or less 3 teeth, or the b lades will shake.(see 5)
9. When working, the materials must be fixed tightly. If you found the sound and shake bee abnormal, rough and bend cutting edge, you should stop timely and check the fault, to make it into regular working.
10. The blades must be reground to be sharp as soon as they bee dull, and it should be reground by professional factory which should not change the original angle.
11. It has to be cautious with packing and unpacking, since the sharp of the tip is very easy to be damaged.
12. When moving the saws, it should be packed appropriately to avoid damage.
半自動單磨頭尖端內側兩用研磨機JDBJD2000F主要特點
本機特別適應于鋸片生產、修磨。完全實現既可做尖端機使用也可做內側機使用的一機兩用功能。
采用高精度的運行、調整機構，結合高效耐用的中央控制系統，使機臺精度高、效率高、且運行平穩、故障率低、噪音小。同時研磨后的鋸片精度高、磨削均勻、耐用性強、切割效果好。廈門金藏機電有限公司XIAMEN KINZO MFG. CO.,LTD. 23 / 23
環評公示相關推薦
鄂ICP備17016276號-1