電氣工程及其自動化外文資料翻譯-電氣類-資料下載頁
2025-05-11 20:20本頁面
【導讀】當計時值到達設定值，定時器觸點會閉合，T33閉合會使置位。在輸入完以上三個程序段后，您就已完成整個例子程序。您創建了包括S7-200CPU類型及其他參數在內的一個項目。保存項目后，您可下載程序到S7-200。實際連接的CPU類型不匹配，STEP7--Micro/WIN會提示您并要您作出選擇。SIMATICS7-200PLC是開放型控制器。只有授權人員才能進入殼、機柜或者電氣控制室。S7-200設備的設計采用自然對流散熱方式?？臻g以便于正常的散熱，前面板與背板的板間距離也應保持至少75mm。對于垂直安裝，允許的最高環境溫度降低10攝氏度。使PLC系統產生一系列不確定的操作。這種不確定的操作會導致人員死亡或重傷，S7-200直流傳感器供電和所有外部供電應該分別給不同的點提供電源。S7-200可以容易地安裝在一個標準DIN路軌或控制柜背板上。
【正文】 at can supply 24 VDC for input points, for relay coil power on the expansion modules, or for other requirements. If your power requirements exceed the budget of the sensor supply, then you must add an external 24 VDC power supply to your system. Refer to Appendix A for the 24 VDC sensor supply power budget for your particular S7200 CPU. If you require an external 24 VDC power supply, ensure that the power supply is not connected in parallel with the sensor supply of the S7200 CPU. For improved electrical noise protection, it is remended that the mons (M) of the different power supplies be connected. Warning Connecting an external 24 VDC power supply in parallel with the S7200 24 VDC sensor supply can result in a conflict between the two supplies as each seeks to establish its own preferred output voltage level. The result of this conflict can be shortened lifetime or immediate failure of one or both power supplies, with consequent unpredictable operation of the PLC system. Unpredictable operation could result in death or serious injury to personnel, and/or damage to equipment. The S7200 DC sensor supply and any external power supply should provide Installing the S7200 Chapter 3 power to different points. Installing and Removing the S7200 Modules The S7200 can be easily installed on a standard DIN rail or on a panel. Prerequisites Before you install or remove any electrical device, ensure that the power to that equipment has been turned off. Also, ensure that the power to any related equipment has been turned off. Warning Attempts to install or remove S7200 or related equipment with the power applied could cause electric shock or faulty operation of equipment. Failure to disable all power to the S7200 and related equipment during installation or removal procedures could result in death or serious injury to personnel, and/or damage to equipment. Always follow appropriate safety precautions and ensure that power to the S7200 is disabled before attempting to install or remove S7200 CPUs or related equipment. Always ensure that whenever you replace or install an S7200 device you use the correct module or equivalent device. Warning If you install an incorrect module, the program in the S7200 could function unpredictably. Failure to replace an S7200 device with the same model, orientation, or order could result in death or serious injury to personnel, and/or damage to equipment. Replace an S7200 device with the same model, and be sure to orient and position it correctly.
畢業設計相關推薦
鄂ICP備17016276號-1