054污水處理廠接納標準(編輯修改稿)
2025-08-10 15:23 本頁面
【文章內容簡介】 1600C Includes toxic wastes that are difficult to treat. . medical waste.1400D Includes mon toxic wastes . waste oil, etching liquid, waste acid, alkali and packaging materials for dangerous goods, etc.1000Note: a. The category that the toxic waste falls into will be decided by the Toxic Waste Treatment Center. b. Calculation is on per ton basis。 quantities less than 1 ton will be calculated based on 1 ton volume. Utility Services Environment Protection amp。 ManagementEnvironment Protection and ManagementSIP Atmospheric Emission Standard (Same as National Standard)Pollutants Maximum Discharge Standard (Mg/Nm3)SmokeNot exceeding Ringelmann No 1 Dust 120Sulphur dioxide 550Nitrogen oxide240Sulphuric acid mist or sulphur trioxide 45 (calculated as SO3)Chromic acid mistSulphuric acid mist45Hydrogen chloride100Chloride9Chlorine65Nitric acid or oxides of nitrogen1400 (nonnitric producing, NO2)240 (nitric acid producing, NO2Lead and its pounds Nickel and its pounds Tin and its pounds Cadmium and its pounds Mercury and its pounds Benzene12Toluene40Dimethylbenzene70Phenol100Formaldehyde25SIP Atmospheric Emission Standard is the same as the National Standard GB 162971996. If there are any parameters that are not listed in the table, please refer to the National Standard or consult with EPB.Any factory exceeding the atmospheric discharge standards may be imposed a fine of up to 2 times the basic discharge fee and be ordered to take corrective action within a prescribed time frame.SIP Noise Standard (Same as National Standard)District TypeDaytime dB(A)Nighttime dB(A)Residential, cultural and educational5545For districts bining residential, mercial amp。 industrial。 and central mercial district.6050Industrial6555Areas on both sides of arterial roads7055Peak value of frequent sudden discharge of noise in the night must not exceed 10dB(A). Peak value of occasional sudden discharge of noise must not exceed standard value of 15 dB(A). The remended standard of measurement is the GB1234990 (國家標準) noise measurement method for industrial and factory premises. The method of supervision is to be executed according to the GB 1234990 noise measurement method for industrial and factory premises.Source: State Environment Protection Bureau, 1 May 90 Utility Services Environment Protection amp。 ManagementEnvironment Impact Assessment (
規章制度相關推薦
鄂ICP備17016276號-1