兼職工程師知識考試題(編輯修改稿)
2024-07-21 03:54 本頁面
【文章內容簡介】 rk number and passive interface D. EIGRP routing, network number, and AS1 Which of the following addresses can be assigned to a host when using a subnet mask of ? (Select three) （ ） A. B. C. D. E. F. 1 You need to set the default gateway of one of your TestKing switches. Which mand will set the default gateway to on a Cisco switch? （ ） A. Switch(config) ip defaultnetwork B. Switch(config)ip routedefault C. Switch(config) ip defaultgateway D. Switch(config) ip route 1 What is the purpose of the mand shown below? ip route serial0/0（ ） A. It configures a router to send all packets out interface serial 0/0. B. It configures a router to block routing updates from being sent out interface serial 0/0. C. It configures a router as a firewall, blocking all unauthorized packets from exiting serial 0/0. D. It configures a router to send all packets for unknown destination networks outinterface serial 0/0. E. It configures a router to drop all packets for which the destination network is unknown. 1 A Class C network address has been subnetted with a /27 mask. Which of the following addresses is a broadcast address for one of the resulting subnets? （ ） A. B. C. D. E. F. 1 在Serial x is down, line protocol is down的情況下可能是哪些故障造成：（）A 載波沒有收到B 線纜出現問題C Clock rate在DCE端沒有設置D 服務提供商造成的ERROR RATE過高1 在Serial x is down, line protocol is down的情況下可能是哪些故障造成：（）A 載波沒有收到B 線纜出現問題C Clock rate在DCE端沒有設置D 服務提供商造成的ERROR RATE過高 請參看一下配置：Figure 11 Output of the HDLC show interface serial CommandTable 11 shows the interface st
環評公示相關推薦
鄂ICP備17016276號-1