linuxoracle10grac(編輯修改稿)
2025-07-16 14:13 本頁面
【文章內(nèi)容簡介】 ode2ping node1privping node2privNode2] ssh node1Node1] service xinetd startNode1] chkconfig timestream onNode1] chkconfig xinetd onNode1] chkconfig ntpd onNode1]service ntpd restartNode1]exitNode2]crontab –e059/1 * * * * rdate –s 059/1 * * * * ntpdate Node2] /etc/Node2] ssh node1Node1] /etc/四．配置雙機信任關系Node1]su – oracleNode1]$ mkdir .sshNode1]$ chmod 700 .sshNode1]$ sshkeygen –t rsaNode1]$ sshkeygen t dsaNode2]su – oracleNode2]$mkdir .sshNode2]$chmod 700 .sshNode2]$sshkeygen t rsaNode2]$sshkeygen t dsaNode1]$ cat /home/oracle/.ssh/ /home/oracle/.ssh/authorized_keysNode1]$ cat /home/oracle/.ssh/ /home/oracle/.ssh/authorized_keysNode1]$ssh node2 cat /home/oracle/.ssh/ /home/oracle/.ssh/authorized_keysNode1]$ssh node2 cat /home/oracle/.ssh/ /home/oracle/.ssh/authorized_keysNode1]$ scp /home/oracle/.ssh/authorized_keys node2:/home/oracle/.ssh/authorized_keys五．配置ASMNode1]service oracleasm configureNode1]service oracleasm createdisk vol1 /dev/sdd1Node1]service oracleasm createdisk vol2 /dev/sde1Node1]service oracleasm scandisksNode1]service oracleasm listdisksNode1]ssh node2Node2]service oracleasm scandisksNode2]service oracleasm listdisksNode2]exitNode1]cd /oradiskNode1]unzip oracle10g01_cluster*****Node1]chown –R oracle:oinstall /oradiskNode1]chmod –R 775 /oradisk然后注銷以oracle登錄Node1]$cd /oradisk/clusterware/cluvfyNode1]$./ stage –pre crsinst n verboseNode1]$export LANG=en_USNode1]$/oradisk/clusterware/runInstaller ignoreSysPreReqs Cluster Configuration 中添加上node2的信息 Network Interface Usage中檢查一下eth0和eth1的接口類型有沒有反，應該eth0為public，eth1為private。 ，外部存儲 ，外部存儲 ：在node2上用ntpdate （手工進行且最好是每兩三秒同步一次）。 ，一定要將如下步驟操作完之后才可以點擊OK。 Node1]/u01/app/oracle/oraInventory/ Node2]/u01/app/oracle/oraInventory/ Node1]/u01/app/oracle/product/
語文相關推薦
鄂ICP備17016276號-1