【文章內(nèi)容簡介】
ed, but this information will need to be propagated via the routing protocol if all works are to be reached. 問題 8 得 0 分,滿分 10 分 A Catalyst 2950 needs to be reconfigured. What steps will ensure that the old configuration is erased? (Choose three) 所選答案: A. Modify the configuration register 正確答案: B. Restart the switch C. Delete the VLAN database D. Erase the startup configuration 反饋: For switches such as the 2950, the process is much the same as a router, but you should delete the file before reloading the router. This file contains VLAN information and is kept in flash, so it will still be present after a reload. 問題 9 得 0 分,滿分 10 分 An administrator would like to configure a switch over a virtual terminal connection from locations outside of the local LAN. Which of the following are required in order for the switch to be configured from a remote location? (Choose two) 所選答案: A. The switch must be reachable through a port connected to its management VLAN 正 A. The switch must be reachable 確答案: through a port connected to its management VLAN D. The switch must be configured with an IP address, sub mask, and default gateway 反饋: In order the tel to any Cisco device, the device must be reachable from the remote location. For a Cisco switch to be reachable from remote locations, it must have an IP address, sub mask, and default gateway assigned. Communication with the switch ... 問題 10 得 0 分,滿分 10 分 Which of the following describe private IP addresses? (Choose two) 所選答案: A. Addresses chosen by a pany to municate with the Inter. 正確答案: B. Addresses that cannot be routed through the public Inter. D. A scheme to conserve public addresses. 反饋: Private IP address space has been allocated via RFC 1918. This means the addresses are available for any use by anyone and therefore the same private IP addresses can be reused. However they are defined as not routable on the public Inter. 問題 11 得 0 分,滿分 10 分 Two TestKin