20xx叉車安全操作程序精選(編輯修改稿)
2025-03-25 22:11 本頁面
【文章內容簡介】 to verify that it is in a good and safe working conditions. 在每天開始叉車操作前，操作人員必須對叉車進展檢查，以確定其處于良好、平安的工作狀態。 operator must be alert and cautious when operating the forklift truck. He must watch for other vehicles, equipment, obstacles, road surface conditions and pedestrians. 操作人員在叉車操作時必須保持警覺和慎重。操作人員必須留意其它車輛、設備、障礙、路面情況和行人。 passenger is allowed to ride on the forklift truck. 叉車不許搭載乘客。 operator shall face in the direction of travel. 操作人員應面對行駛方向。 operator shall keep the mast tilted back with forks 150 to 300 mm above the ground while traveling loaded or unloaded. 行駛中不管有無負重，操作人員應將前叉后傾，車叉間隔地面150至300 mm。 operator shall check for adequate overhead and lateral clearance before entering and during subsequent maneuvering in any building, plant facility or congested area. 在進入任何建筑、裝置設備或密集區域之前及之后操作中，操作人員應檢查上方及側面間隔是否足夠。 operator shall sound the horn at junctions, corners and in areas where vision is being obstructed. 在穿插口、轉彎處以及視線受阻區域內， 操作人員應鳴喇叭。 operator shall drive slowly and cautiously in the following circumstances. 在以下情況下，操作人員應緩慢、慎重駕駛：when making a turn 轉彎時when reversing 倒車時driving over a hump 凹凸不平地面行駛時driving up or down a ramp 上下坡道時driving on a wet, slippery or uneven surface 濕、滑、不平地面行駛時driving in narrow roads 狹窄路面行駛時driving in high noise areas or where vision is obstructed 高噪音區或視線受阻區域內行駛時driving in close proximity to potentially hazardous area 危險區附近行駛時 operator shall travel in the reverse
范文總結相關推薦
鄂ICP備17016276號-1