紅外光語音通信裝置(存儲版)
【正文】 通過調節和來改變?cè)鲆娣糯蟆Ｈ鐖D3所示。為了縮小體積，單片機使用TSSOP封裝。我們采用單個發射和單個接收的裝置，使用一個MOS管來驅動，2N7002的導通內阻和開啟電壓值很低減少了成本，減少了功耗，提高了系統的穩定性。圖1發射和接受模擬電路這種發射裝置是有許多的發射電路和許多的接收裝置并聯組裝而成的，它一般會用多個MOS管來驅動，增加了電路的成本并大大降低了工作效率。二、理論分析與計算1．PWM調制脈沖寬度調制（PWM）是一種對模擬信號電平進行數字編碼的方法，使用固定頻率矩形波的占空比來對模擬信號值進行調制。8．溫度數據通道系統使用NTC熱敏電阻進行測溫。+5V穩壓由LM2940構成， LM2940比7805的轉換效率高。3．運算放大器芯片選擇 由于OP07非常低的輸入失調電壓，同時具有輸入偏置電流低和開環增益高的特點，適用于放大傳感器的微弱信號。經比較，本設計使用方案二。ASK調制是用調制信號去控制高頻正弦載波的幅度，使其按調制信號的規律變化的過程。關鍵詞：MSP430 PWM調制 濾波放大Abstract：The design concept of innovation and green based design and innovation, a novel infrared sound transmission device based on wireless resonant original emission, ultrasonic transmission, infrared emission, infrared transmission technology used only Yu Jun grade field munication, we further applied to civil field, pioneered the concept of science and technology innovation, so that further service to the people. The precise operational amplifier amplification, using low power operational amplifier chip, reduce power consumption. Especially the relay station, using 430 singlechip microputer with low power consumption for accurate data receiving and transmitting, simultaneously transmitting and receiving infrared probe less, reducing the power consumption of relay station, used to maintain the sound amplification in audio amplifier eventually receiving part uses a sound better, by Butterworth lowpass filter and bandpass filter are mute finally, extracted from signal analog channel and digital chan
公司管理相關推薦
鄂ICP備17016276號-1