液壓臺虎鉗畢業設計-wenkub
2022-12-12 17:07:30 本頁面
【正文】 壓傳動、螺紋傳動、夾緊力、生產效率 Abstract Hydraulic machine to thread the jaw is jaw improvement, mainly for the into mass production. He can achieve rapid, loosen up, and can ensure the clamping force can avoid excessive clamping force and make relatively thin part deformation. In order to achieve rapid clamping and loosen, the traditional thread into hydraulic transmission, activities of the body is fixed by clamp brake handle to drive the steel with brake block through the friction will carry death activities, so as to realize the activities and clamp and the fast moving, clamp and clamping force by the clamping spring to ensure that, we can adjust the spring tension level to ensure that the size of the clamping force. Hydraulic machine with the traditional thread a jaw jaw or some disadvantages pared. One is better than the traditional in the cost to expensive, and relatively speaking, manufacturing plex, the operation is more plicated。 傳統的螺紋臺虎鉗工作效率較低。但單獨適合鉗工已經足夠了。 4 工作原理 ： 臺虎鉗的夾緊力是靠彈簧來保證的，液壓系統的功用只是讓活動鉗口克服彈簧的張力向左移動一點距離， 其工作步驟如下： 一、通過調整調整螺母 1，調整好彈簧在圖示位置張力，使得張力等于要加工零件的夾緊力 二、壓油手柄 16，通過油管 15 給 6 柱塞缸注入液壓油，通過 6 推動 5 活動鉗口向左移動。實現快速夾緊。 與傳統的螺紋臺虎鉗相比較，鉗工用臺虎鉗有以下缺點： 。只要把剎車手柄 8 再 往上拉，就可以拖動活動鉗口，實現快速松開。 2. 因?yàn)橐簤涸菢?biāo)準件，盡量選取標準件。再由 A=π R178。便于設計，所以選擇柱塞直徑為 8mm的柱塞式液壓泵。此時作用在柱塞式液壓泵上面的力為 F=PA F=π 4 4≈ 300N 經過杠桿，操作者用不到 300N 的力就能很輕松的操作了，所以選取 的液壓元 件合理 。此時作用在柱塞式液壓泵上面的力為 F=PA F=π 4 4≈ 300N 經過杠桿，操作者用不到 300N 的力就能很輕松的操作了，
公司管理相關推薦
鄂ICP備17016276號-1