單螺紋桿機畢業設計外文翻譯--對壓縮機單螺桿專用加工機床的介紹(已修改)
2025-06-01 15:16 本頁面
【正文】 Dedicated to the single screw pressor machine updated the Introduction Abstract: This paper describes four areas from the existing singlescrew machine layout and structure, and put out the advantages and disadvantages of the list, because of the pressor plant singlescrew machine tools and machine tool external Security information, the above introduction there is inevitably onesided and wrong, and are therefore singlescrew pressor for the production of reference works. First, introduce the layout of machine tools Decide the size of the pressor displacement of the stars round, screw diameter, mesh size and the size of the center distance, so different in diameter screw, machine tool spindle and the rotary center are also different. To meet the processing of different diameter screw, single screw Currently the layout of machine tools in general there are several options. The first is: machine tool rotary tool spindle center and the center distance for the fixed Machine tool rotary tool spindle center and the center distance for the fixed, can not adjust the center distance. Processing of several of the screw diameter on the center distance required several different specifications of the machine. Advantages: simple structure of the machine. Disadvantage: each machine can only process a specification of the screw, when the market on a certain specification requirements when the screw pressor, resulting in a machine, other machine idle. The second: the machine tool spindle box for rotary Processing screw machine according to the size of the diameter at the processing before a point of rotating spindle box. Spindle box that the machine can turn on a machine at the abovementioned article on the use of the improvements, with the first structure of a machine tool is basically the same. Advantages: the structure of machine tool easy to adapt to a variety of specifications of the processing screw. One disadvantage: after the rotating spindle box and the tool spindle turning center line distance between the center line of accurate measurement difficult. 2 disadvantage: after the rotating spindle spindle box and the front surface of the rotary cutter centerline distance between the reduction of the larger diameter of the screw processing is limited. The third: the machine tool spindle box for horizontal mobile Box at the bottom of the spindle and the base there is arranged between the rectangular sliding rail, spindle box perpendicular to the direction of movement of spindle centerline and perpendicular to the centerline of the tool rotation. Through the power of the spindle box spline shaft to the base of the tool feed mechanism. Screw diameter, according to the size of the processing in the processing of the previous round by hand to the body put into the screw spindle box moved to the appropriate location, and then screw the spindle box on a fixed base. Spindle box available from the mobile Grating detection, position error 177。 . Horizontal spindle box can be used as a mobile machine can process diameter φ95 ~ φ385mm any kind between the screw specifications. Φ95 ~ φ385mm processing because of the diameter of the screw, causing the front surface and the tool spindle rotation the distance between the center line of the margin is too large, the actual
畢業設計相關推薦
鄂ICP備17016276號-1