機械類畢業論文外文文獻資料翻譯-其他專業(已修改)
2025-02-04 06:08 本頁面
【正文】 1 外文 文獻 資料 At constant rotating speed, localized faults in rotating machine tend to result in periodic shocks and thus arouse periodic transients in the vibration signal. The transient feature analysis has always been a crucial problem for localized fault detection, and the key aim for transient feature analysis is to identify the model and its parameters (frequency, damping ratio and time index) of the transient, and the time interval, . period, between transients. Based on wavelet and correlation filtering, a technique incorporating transient modeling and parameter identification is proposed for rotating machine fault feature detection. With the proposed method, both parameters of a single transient and the period between transients can be identified from the vibration signal, and localized faults can be detected based on the parameters, especially the period. First, a simulation signal is used to test the performance of the proposed method. Then the method is applied to the vibration signals of different types of bearings with localized faults in the outer race, the inner race and the rolling element, respectively, and all the results show that the period between transients, representing the localized fault characteristic, is successfully detected. The method is also utilized in gearbox fault diagnosis and the effectiveness is verified through identifying the parameters of the transient model and the period. Moreover, it can be drawn that for bearing fault detection, the singleside wavelet model is more suitable than doubleside one, while the doubleside model for gearbox fault detection. This research proposed an effective method of localized fault detection for rotating machine fault diagnosis through transient modeling and parameter detection. Rotating machinery covers a broad range of mechanical equipments and plays an important role in many industrial applications, such as aircraft engines, transmission systems, power plants, etc. Most of the machinery was operated by means of bearings, gearboxes and other rotating ponents, which may develop faults. These faults may cause the machine to break down, resulting in significant economic loss and even catastrophic personal casualties. The study of rotating machine fault diagnosis has thus attracted attention over the past decades. The transients o
畢業設計相關推薦
鄂ICP備17016276號-1