【正文】
same material as door panel 普通平板頂線,同門板材質,雙層高 36MM,不銑形。有封頂板時,封頂板材質同門板材質,厚 18MM normal flat crown molding: same material as door panel,doubleshelf height36mm,not millingshaped. top filler is same material as door panel,18mm thickness 銑形頂線:門板有銑形,頂線同門板材質,雙層高 36MM,銑形(如圖五)。有封頂板時,封頂板材質同門板材質,厚 18MM millingshaped crown molding: door panel with millingshaped,crown molding is same material as door panel,doubleshleves height36mm,milling(refer to drawing 5). Top filler is same material as door panel,18mm thickness 實木類與吸塑類頂線,配套相應套路的外購門板,其具體造型配合相應的套路,一般不設計封頂板。 Solid wood and blister crown molding: Matching the corresponding door outsourcing,do not do design of top filler normally Crown molding drawings ? 一、吊柜 wall cabi ? 組成部份 左側板、右側板均為 18mm厚 ? left side panel、 right side panel is 18mm thickness ? 頂板 top panel 18mm厚 ? 底板 bottom panel 18mm厚 ? 背板 back panel 5mm厚中纖板 5mm thickness MDF board ? 層板 shelf panel 18mm厚(前面帶有鋁擋條) ? (front with aluminum baffle) ? 玻璃層板 glass shlef panel 8mm厚 ? 柜體標準 carcase standard: ? A、高度 hieght: ? H=350 mm、 450 mm、 600 mm、 700 mm、 800 mm、 900 mm、 1360mm。 ? 注:只有實木做 900 mm。 (900mm only for solid wood) ? B、柜體深度 depth ? D=330mm 不含門板 (not including door panel) ? C、柜體寬度 width ? W=300 mm、 360 mm、 400mm、 450 mm、 50 mm、 600mm。 單開門 singledoor ? W=600、 720 mm、 800 mm、 900 mm。 對開門或上翻 right and left hinge or liftup door ? W=600, 900mm。 ? 上平移門 upper flap sliding door ? W=800, 900mm。 ? 上翻折疊門 lifting and folding door ? W=1200mm, 1500mm。 ? 單門雙柜(只有“西蔓蒂克 Ⅱ 、第五元素”兩個套路可做)。 Singledoor cabi W/2 doors(only for “西蔓蒂克 Ⅱ 、第五元素” ) ? W=1200mm。 ? 單上翻木框玻璃門吊柜(有第五元素、華爾茲、加州陽光可做)。 Lifting wooden frame glass singledoor wall cabi(only for “第五元素、華爾茲、加州陽光“) ? 吊柜與地柜之間 Between wall and base cabi 箱體結構圖 二、地柜 base cabi 標準地柜的組成部件 ponents of standard base cabi: 左側板 left side panel、右側板 right side panel 均為 18mm厚 地柜底板 bottom panel 18mm厚 前拉條 front strip 80mm寬 18mm厚 后拉條 back strip 80mm寬 18mm厚 背板 back panel 18mm厚 層板 shelf panel 18mm厚 (前面帶有鋁擋條 )(fr