電器產品產品合格證中英對照-文庫吧
2025-07-19 06:28 本頁面
【正文】 e between the parts the main circuit and metal ponents ground should be not less than 20mm. 0150mm鋼直尺straight steel ruler電氣間隙electrical distance≥10mm爬電間隙creepage distance≥3手動操作試驗互換性試驗interchangeable test a manual test 任一可移開部件在同一規格的兩個隔離室中各抽插5次，檢查互換情況，抽插應靈活。any parts can be removed in the same specification of the two isolation rooms inserted and taken out five times, check the exchange situation, inserted and taken out should be flexible.手動操作manual test手動操作部件操作5次，操作靈活無卡滯現象。機械電氣連鎖有效。parts be manually operated five times, operation flexible, no clamping stagnation. Mechanical electrical chain effective.4通電操作power operation通電操作5次，電器元件動作正常、儀表指示準確，符合裝置的電氣設計要求。 Power operation five times, electrical ponents work well, instrument instruction accurate, meet the electrical design requirements. 通電操作臺Power console5工頻耐壓試驗frequency voltage withstand test施加交流正弦50Hz電壓2500V，施壓時間1s施壓部位如下：voltage applied AC sinusoidal 50Hz 2500V, time 1s, position as follows:主電路與地之間the main circuit and ground：2500V/1s工頻耐壓試驗臺frequency voltage withstand test主電路與各相之間the main circuit and the phase：2500V/1s主電路與輔助電器之間the main circuit and auxiliary appliance：2500V/1s輔助電路與地之間the auxiliary circuit to ground：2500V/1sthe insulating material of the shell and handle with live parts and bare conductive parts times the voltage applied6保護電路連續性試驗protection circuit continuity test金屬安裝結構與框架之間的緊固點應穿透不導電絕緣層，接地電阻應≤100mΩ，測量點
電大資料相關推薦
鄂ICP備17016276號-1