apqp先期產品質量策劃講義-展示頁
2025-03-05 07:10本頁面
【正文】 ct design inputs requirements, including the following: – customer requirements (contract review) such as special characteristics (see ), identification,traceability and packaging。 – targets for product quality, life, reliability, durability, maintainability, timing and cost. TS 16949的要求 TS 16949的要求 ? Multidisciplinary approach – The anization shall use a multidisciplinary approach to prepare for product realization, including – . development/finalization and monitoring of special characteristics, – . development and review of FMEAs, including actions to reduce potential risks, and – . development and review of control plans. TS 16949的要求 ? Manufacturing process design input ? The anization shall identify, document and review the manufacturing process design input requirements, including – product design output data, – targets for productivity, process capability and cost, – customers requirements, if any, and – experience from previous developments. TS 16949的要求 ? Special characteristics ? The anization shall identify special characteristics [see d)] and – include all special characteristics in the control plan, – ply with customerspecified definitions and symbols, and – identify process control documents including drawings, FMEAs, control plans, and operator instructions with the customer’s special characteristic symbol or the anization’s equivalent symbol or notation to include those process steps that affect special characteristics. ? Product design outputs ? The product design output shall be expressed in terms that can be verified and validated against product design input requirements. The product design output shall include： – design FMEA, reliability results, – product special characteristics and specifications, – product errorproofing, as appropriate, – product definition including drawings or mathematically based data, – product design reviews results, and – diagnostic guidelines where applicable. TS 16949的要求 TS 16949的要求 ? Manufacturing process design output ? The manufacturing process design output shall be expressed in terms that can be verified against manufacturing process design input requirements and validated. The manufacturing process design output shall include – specifications and drawings, – manufacturing process flow chart/layout, – manufacturing process FMEAs, – control plan (see ), – work instructions, – process approval acceptance criteria, – data for quality, reliability, maintainability and measurability, – results of errorproofing activities, as appropriate, and – methods of rapid detection and feedback of product/manufacturing process nonconformities. TS 16949的要求 ? Monitoring ? Measurements at specified stages of design and development shall be defined, analysed and reported with summary results as an input to management review. TS 16949的要求 ? Design and development validation — Supplemental ? Design and development validation shall be performed in accordance with customer requirements including programme timing. TS 16949的要求 ? Product approval process ? The anization shall conform to a product and manufacturing process approval procedure recognized by the customer. ? This product and manufacturing process approval procedure shall also be applied to suppliers. WHEN DO APQP ？ ? 新產品 – 我們希望新產品一開始投產就有好的結果，而不是匆促生產，是謀定而后動，是經詳細的策劃而產生好的結果。 APQP五個階段 企劃 產品設計與開發 制程設計開發 產品及制程確認 回 饋 評 鑒 及 矯 正 措 施 生 產 生產計劃 第一階段 計劃 和確定 第二階段 產品設計 開發 第三階段 制程設計 開發 第四階段 產品及制 程確認 第五階段 回饋評鑒及 矯正措施 概念提出 與核準 計劃核準 原型品 試 作 量 產 DFMEA DOE QFD PFMEA DOE SPC PFMEA PFMEA,MSA S
環評公示相關推薦
鄂ICP備17016276號-1