機械磨具外文翻譯-展示頁
2025-07-05 00:15本頁面
【正文】 m steel, the experimental result and productive practice all prove that the burr of dies which produced by spark cutting are higher 25%~~30% than produced by grinder ,NC or CNC. The reason is that not only the latter have more exact machining accuracy but also the value of roughness Ra is less one order than the formmer, it can be reached . Therefore, the die’s initial blanked accuracy depends on the accuracy of manufacture, quality and so on. The normal error of the punch die is the practicable error when the fist cutter grinding and the last cutter grinding before the die produce the last qualified product. As the increase of cutter grinding, caused the measure the nature wear of the dies are gradual increasing, the error of punching part increase also, so the parts are blew proof. And the die will be unused. The hole on the part and inner because the measure of wear will be small and small gradually, and its outside form will be lager in the same reason. Therefore, the hole and inner form in the part will be made mould according to oneway positive deviation or nearly equal to the limit max measure. In like manner, the punching part’s appearance will be made mould according to oneway negative deviation or nearly equal to limit mini measure. For this will be broaden the normal error, and the cutter grinding times will be increased, the life will be long. The limit error in punching parts are the max dimension error which practicable allowed in the parts with limit error. This kind of parts usually are the last qualified products before the die discard.For the all classes of dies, if we analyse the fluctuate, tendency of increase and decrease and law which appeared in the die’s whole life, we will find that the master of the error are changeless。外文文獻資料General allsteel punching die’s punching accuracyGeneral allsteel punching die’s punching accuracyAccuracy of panel punching part is display the press accuracy of the die exactly. But the accuracy of any punching parts’ linear dimension and positional accuracy almost depend on the blanking and blanking accuracy,. So that the pound mould of pound punching’s accuracy, is typicalness and representation in the majority.Analyse of the die’s accuracy For the analyse of pracyicable inaccuracy during production of dies to inactivation, we could get the tendency when it is augmentation in most time. From this we could analyse the elements. When the new punch dies pt into production to the first cutter grinding, the inaccuracy produced called initial error。 if the die grinding more than twenty times, until it’s discard, the inaccuracy called conventional error。 the error that because the abrade of the cutter and impression will be as the cutter grinding times increased at the same time. And that will cause the error oversize gradually。, its roughness Ra magnitude are , height of burr are 。 Flushesthe structure rigidity and the threedimensional shape affects itsshape position precisio
法律信息相關(guān)推薦
鄂ICP備17016276號-1