【正文】
11 125 仿真與調試 22 仿真軟件GX 22 系統的仿真 22 工作過程分析 23致謝 24附錄 25參考文獻 26焦作大學機電工程學院畢業設計 第1章 緒論1 緒論 PLC的認識PLC是專為在工業環境下應用而設計的一種數字運算操作的電子裝置,是帶有存儲器,可以編制程序的控制器。焦作大學機電工程學院畢業設計 目錄目如果在限時內無人搶答,則啟動音效電路和總臺指示燈。搶答成功后,輔助繼電器接通,啟動音效電路和某分臺指示燈,驅動外部數碼顯示器顯示搶答成功組號。 開始搶答前,主持人首先通過復位按鈕實現電路復位,在提問之后,打開選擇開關啟動定時器。基于PLC控制的搶答器畢業設計 李曉 寧 焦作大學機電工程學院畢業設計 基于PLC控制的搶答器畢業設計專業名稱:應用電子技術學生姓名:導師姓名: 職 稱:講 師焦作大學機電工程學院2012年 12 月 中圖分類號: 密級: UDC: 單位代碼:基于PLC控制的搶答器設計Based on PLC control responder design 姓 名學 制三年專 業應用電子技術研究方向電子技術導 師職 稱講 師論文提交日期論文答辯日期焦作大學機電工程學院焦作大學機電工程學院畢業設計 摘要摘 要PLC的應用領域已經拓寬到了各個領域,在日常生活中,智能搶答器廣泛的應用于各種競賽和搶答場合。由于PLC系統的搶答器相對穩定,所以設想可以利用PLC進行搶答器的設計。在搶答限時內,當某一組搶先按下?lián)尨鸢粹o后,對應的輔助繼電器接通,同時切斷其它搶答回路,實現互鎖。搶答成功后,同時啟動定時器,當定時器計時結束,啟動音效電路和指示燈提示回答時間到。關鍵詞 搶答器;可編程控制器; ABSTRACT PLC application field has been broaden from various fields, in daily life, intelligent vies to answer first device widely used in various petitions and vies to answer first occasion. Due to the PLC system responder relative stability, so imagine can use PLC for the design of the responder. Before start vies to answer first, the first through the reset button realize circuit reset, the questions later, open the selector switch start timer. In vies to answer first time, when a group of preemptive press vies to answer first button, the corresponding auxiliary relay on, at the same time cut off other vies to answer first circuit, realize interlock. Vies to answer first after the success of the auxiliary relay on, start sound circuit and some points table lamp, drive external digital display shows vies to answer first successful group number. After the success of the vies to answer first, and the launch of the timer, when the timer timing over, start sound circuit and light hint time to answer. If the time no contest, will enable audio circuit and desk lamp.Key word: responder; PLC (programmable logic controller)。PLC即可編程控制器(Programmable logic Controller,是指以計算機技術為基礎的新型工業控制裝置。在電視上我們會經??吹揭恍┲橇尨鸬墓?jié)目,如果要是讓搶答者用舉手等方法,主持人很容易誤判,會造成搶答的不公平,比賽中為了準確、公正、直觀的判力競賽的電路裝置,該裝置由主體電路與擴展電路組成。用控制電路和主斷出第一個搶答者,所設計的搶答器通常由數碼顯示、燈光、音響等多種手段指示第一搶答者。八路數字搶答器是一個可供八個參賽組進行智持人開關啟動報警電路,以上兩部分組成主體電路。通過這次設計,掌握PIC單片機的原理,了解簡單多功能搶答器組成原理,初步掌握多