【正文】
in phase behind the primary voltage VP. It is this ponent that sets up the flux in the core。 and (2) it provides a ponent to account for the hysteresis and eddy current losses in the core. There bined losses are normally referred to as the core losses. The noload current Iθ is usually few percent of the rated fullload current of the transformer (about 2 to 5%). Since at noload the primary winding acts as a large reactance due to the iron core, the noload current will lag the primary voltage by nearly 90186。 外文資料翻譯 Power Transformer Principles 1. INTRODUCTION The highvoltage transmission was need for the case electrical power is to be provided at considerable distance from a generating station. At some point this high voltage must be reduced, because ultimately is must supply a load. The transformer makes it possible for various parts of a power system to operate at different voltage levels. In this paper we discuss power transformer principles and applications. 2. TOWWINDING TRANSFORMERS A transformer in its simplest form consists of two stationary coils coupled by a mutual magic flux. The coils are said to be mutually coupled because they link a mon flux. In power applications, laminated steel core transformers (to which this paper is restricted) are used. Transformers are efficient because the rotational losses normally associated with rotating machine are absent, so relatively little power is lost when transforming power from one voltage level to another. Typical efficiencies are in the range 92 to 99%, the higher values applying to the larger power transformers. The current flowing in the coil connected to the ac source is called the primary winding or simply the primary. It sets up the flux φ in the core, which varies periodically both in magnitude and direction. The flux links the second coil, called the secondary winding or simply secondary. The flux is changing。 therefore, it induces a voltage in the secondary by electromagic induction in accordance with