服裝廠面料檢驗之四分制(參考版)
2025-07-17 00:07本頁面
【正文】 He or she must be active and physically fit.5.He or she must have a minimum of two year experience in the textile industry.3.1.Textile Links and Controls fabric inspection form.Digital Camera for taking reference snaps.7.Stickers or masking tape to identify the faults.5.Measuring tape amp。Inspection frame with counter. 2.TOOLS FOR FABRIC CHECKING:Textile Links and Controls suggests to use a format for the checking of all fabric shade variations from roll to roll. In this format water falls of different shades’ categories of different rolls is maintained and pared to each other to check the extent of the shading variation. If any shade requires special attention / treatment in the cutting, it is mentioned in the remarks column. Record the faults of the fabric on the Fabric Quality Report. skewing in the fabric.8.Check that the roll contains the meters as stated by the Fabric Supplier.7.Cut off a 6inch piece across the width of the fabric from the beginning of the roll. Mark this piece so that the inspector will know the right and left side of the fabric. Use the strip to check the shading sidetoside and endtoend by checking it at least against the middle of the roll and once at the end of the roll.5.Select the fabric rolls for inspection.3.This procedure shows the steps necessary to ensure an effective fabric inspection quality control program:1. take out 10% of the fabric randomly in such a way that every color, design, fabric width amp。A minimum 10% quantity of fabric for each color way, design, fabric width or fabric construction listed against a particular contract must be inspected. In case, if any problem arises in any of the above style then it has to be reinspected another 10%. If the problem is still present and the points exceed the acceptable limit, the fabric lot is to be rejected.ROLLS SELECTION PROCEDURE: Controls for piece goods / made ups fabric is 15 / 100 square meter. And for greige fabric it is 10 / 10
環(huán)評公示相關(guān)推薦
鄂ICP備17016276號-1