無功補(bǔ)償外文翻譯(適用于外文翻譯中英文對照)(編輯修改稿)
2025-01-11 03:57 本頁面
【文章內(nèi)容簡介】 power pensation and the role and view of the current power system， industrial enterprises， the problems for the proposed improvements and In industrial enterprises， the vast majority of electrical equipment belongs toperceptual load， these devices in operation to absorb a large number of reactive increase in reactive power supply system power factor to lower system voltage drop tooccur， electrical equipment not fully utilized， increasing line losses and lowerpoweredequipment， power supply capacity and so on. In situ reactive power pensation andthus improve the power factor of the Energy Conservation has extremely choice of method of pensation Compensation for reactive power pensation is divided into centralized anddecentralized pensation for three kinds of pensation and in situ. Focus onpensation， that is， high and low voltage power distribution set up by several groupswithin the capacitor ， capacitor connected to the power distribution bus ， thepensation for the distribution of power within the reactive power， and to reach therequired value of the total power factor above. This method of pensation canpensate for high and low voltage bus routes prior to the reactive power， which isequivalent to the reactive power source to move the electricity distribution panies， wallowing users to power the system requirements for reactive power has been reduction inthe electricity sector to achieve the required power factor. And their distribution within theenterprise bus following the line of transformer and reactive power pensation can notplay a role， there is still a large number of reactive power line flows within the enterpriseand generate losses. Dispersion pensation is the capacitors were installed at variousworkshops at the switchboard， which will enable installation of distribution transformerand the substation to the plant lines can be due to a decrease in reactive load pensationeffect. Local pensation is the reactive power pensation device directly connectedto the induction motor terminals on the side or into the line. Focus o
研究報告相關(guān)推薦
鄂ICP備17016276號-1