空調公司1101檢驗測量和試驗設備控制程序(編輯修改稿)
2025-08-18 18:43 本頁面
【文章內容簡介】 ，作為校準依據的技術文件，如檢具等。 When the calibration of the IMTE can39。t be traced in the national standard, a selfcalibration method will be piled by the Engineering Department as the technical documents for calibration . 經檢定的檢測設備，由相應的計量部門發給檢定證書，并由質量部在檢測設備上標以合格、停用、準用、報廢等狀態標識， 并填寫《檢測設備履歷卡》 The calibrated IMTE shall be issued with Authentication Certificate by corresponding measurement authority. Meanwhile, the Quality Department shall attach status labels onto the IMTE, . acceptable, suspension, admissible, or scrap, and fill in the IMTE Record Card. 程 序 文 件 Procedure Document 重慶英特空調有限公司 Air International Chongqing Co., Ltd. 文件名稱 (Doc Name):檢驗測量和試驗設備控制程序 Inspection, Measuring amp。 Test Equipment Control Procedures 版次 Ver 頁次 Page 發行日期 Release Date 文件編號 (Doc No)： AICQ/QP1101 B/0 4 7 20xx0110 質量部保存檢測設備的檢定和校準記錄，及檢測設備的其他檔案 。 The Quality Department will keep the inspection and calibration records of the IMTE, and other files. 使用和維護 Operation and Maintenance 檢測設備使用人員正確使用和維護檢測設備，做好日常的維護保養工作，使設備處于完好狀態。 All users should operate the IMTE correctly and be responsible for the daily maintenance to make the equipment stay in good order. 發現檢測設備偏離校準狀態時，應停止使用，并通知質量部對檢測過的產品、項目重新評定其有效性，并采取相應的糾正措施，追溯到不合格的產品按《不合格品控制程序》執行。 When the IMTE is found of deviation off the calibration, it should be suspended from using. The Quality Department should be informed to reevaluate the effectiveness of the inspected products and items, and meanwhile conduct corrective actions. To trace the unacceptable product, follow the “Nonconforming Product Control Procedures”. 檢測設備的使用環境應滿足測量要 求。 The operating environment of the IMTE should meet the measurement requirements. 檢測設備的搬運、防護和貯存期間防止沖擊、碰撞等損傷應嚴格按使用說明規定執行，使其準確度和適用性保持完好，使用前檢查其校準狀態是否完好，并防止因調整不當而使其準確度失效。 In handling, preservation and storage process, the IMTE must be prevented from shock and bumps. Follow the operation instructions and ensure the IMTE in good precision and applicability. Before use, check the calibration status of the IMTE and prevent precision failure due to improper adjustment. 準用和報廢 Admission and Scrap 檢測設備經維修后達不到合格標準，但仍能滿足測量要求，經管理者代表同意后可準用，達不到測量要求時，作報廢處理。 If the IMTE, after being repaired, cannot reach the st
公司管理相關推薦
鄂ICP備17016276號-1