電器產品產品合格證中英對照(編輯修改稿)
2025-08-30 06:28 本頁面
【文章內容簡介】 不少于5處。測試電流10A。the fastening points between metal mounting structure and frame should penetrate nonconductive insulation, grounding resistance should be ≤ 100mΩ, measuring not less than five points. Test current 10A.測試儀tester7絕緣電阻測量Insulation resistance measurement絕緣電阻應≥1kΩ/V測量部位如下insulation resistance ≥ 1kΩ / V measurement position as follows:：主開關電器在斷開位置時兩個斷口之間when the main electrical switch is off, between the two fracture絕緣電阻儀Insulation resistance meter主開關電器在閉合位置時的不同極的帶電部位之間。When the main electrical switch is on, between the live parts of different pole.主電路與控制電路之間。between the main circuit and control circuit.各帶電部件與金屬框架之間。the live parts and metal frameworks.8外殼防護等級shell protection gradeIP30：用￠，施加10N外力，不能進入。IP30: with 162。 copper, applied 10N force, can not enter.試棒Test bars判定結論conclusion日期date測試人tester 日期date蘇州迪生電器有限公司Suzhou Disheng Electrical Appliance Co., Ltd.PZ30 例 行（出廠）檢 驗 報 告PZ30 routine (factory) inspection reports項目名稱Project name 編號serial no. 產品名稱product name：終端箱terminal box 型號規格model：PZ30 出廠編號serial number：序號No.試驗項目testing items標準要求standards測試設備testing device測試結果Testing results 備注remark1一般檢查General examination電器元件應經過檢驗合格，有合格證明書。electrical ponents should be subject to inspection, with a certificate of p
電大資料相關推薦
鄂ICP備17016276號-1